Onkyo TX-SR876 Owner Manual - Page 106
Tone Control Settings, DSD Setting, Multiplex/Mono Settings, PLIIx/Neo:6 Settings, Treble, DAC Direct
UPC - 751398008337
View all Onkyo TX-SR876 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Advanced Setup-Continued 5 When you've finished, press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. Tone Control Settings You can adjust the tone (bass and treble) of the front, center, surround, and surr back speakers individually. For the subwoofer, you can adjust the bass. ■ Bass You can boost or cut low-frequency sounds from -10 dB to +10 dB in 1 dB steps. ■ Treble You can boost or cut high-frequency sounds from -10 dB to +10 dB in 1 dB steps. Notes: • The tone control circuits are bypassed when the Direct, Pure Audio or THX listening mode is selected. • This setting is not available when the multichannel Analog input is selected. • This procedure can also be performed on the AV receiver by using its [TONE], [F], and [S] buttons (see page 72). DSD Setting ■ DAC Direct This setting determines whether or not DSD (SACD) audio signals are passed through the DSP for A/V Sync, delay, etc., processing when the Pure Audio or Direct listening mode is selected. No: DSD signals are processed by the DSP (default). Yes: DSD signals are not processed by the DSP. Multiplex/Mono Settings Multiplex ■ Input Ch(Mux) This setting determines which channel of a stereo multiplex source is output. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on. Main: The main channel is output (default). Sub: The sub channel is output. Main/Sub: Both the main and sub channels are output. Mono ■ Input Ch(Mono) This setting specifies the channel to be used for playing any 2-channel digital source such as Dolby Digital, or 2-channel analog/PCM source in the Mono listening mode. L+R: Both the left and right channels are output (default). L: Only the left channel is output. R: Only the right channel is output. ■ Output Speaker This setting determines which speakers output mono audio when the Mono listening mode is selected. C: Mono audio is output by the center speaker (default). L/R: Mono audio is output by the front left and right speakers. PLIIx/Neo:6 Settings PLIIx Music(2ch Input) These settings apply to only 2-channel stereo sources. If you're not using any surround back speakers, these settings apply to Dolby Pro Logic II, not Dolby Pro Logic IIx. ■ Panorama With this setting, you can broaden the width of the front stereo image when using the Dolby Pro Logic IIx Music listening mode. On: Panorama function on. Off: Panorama function off (default). 106