Onkyo TX-SR876 Owner Manual - Page 56
Video Input Setup
UPC - 751398008337
View all Onkyo TX-SR876 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
First Time Setup-Continued 5 Use the Up and Down [R]/[X] but- tons to select "Resolution", and use the Left and Right [F]/[S] buttons to select: Through: Select this to pass video through the AV receiver at the same resolution and with no conversion. Auto: Select this to have the AV receiver automatically convert video at resolutions not supported by your TV. (Not available when the "Monitor Out" setting is set to "Analog".) 480p: Select this for 480p output and video conversion as necessary. 720p: Select this for 720p output and video conversion as necessary. 1080i: Select this for 1080i output and video conversion as necessary. 1080p: Select this for 1080p output and video conversion as necessary. (Not available when the "Monitor Out" setting is set to "Analog".) Source: Output will be according to the resolution level which was set with Resolution inside Source: 4-4. Picture Adjust. (Setting for each Source becomes possible.) 6 Press the [SETUP] button. Setup closes. Notes: • See page 35 for charts showing how the "Monitor Out" and "Resolution" settings affect the video signal flow through the AV receiver. • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. Video Input Setup HDMI Input Setup If you connect a video component to an HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN 1, you must assign HDMI IN 1 to the DVD input selector. By default, none of the HDMI inputs are assigned. If you've connected your TV to the AV receiver with an HDMI cable, you can set the AV receiver so that composite video, S-Video, and component video sources are upconverted* and output by the HDMI outputs. You can set this for each input selector by selecting the "- - -" option. Composite video, S-Video, component video IN HDMI OUT Composite video, S-Video, component video HDMI 1 Press the [RECEIVER] button, followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 2 Use the Up and Down [R]/[X] but- tons to select "1. Input/Output Assign", and then press [ENTER]. The "Input/Output Assign" menu appears. 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video Input 4. Digital Audio Input 5. Analog Audio Input 56