Onkyo TXSR705 Owner Manual - Page 100
Setting the Powered Zone 2
UPC - 751398007804
View all Onkyo TXSR705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
TX-SR705_En.book Page 100 Monday, May 28, 2007 2:13 PM Zone 2-Continued Setting the Powered Zone 2 To use Zone 2, you must make this setting. It enables the speakers connected to the ZONE 2 SPEAKERS terminals so that they produce sound when Zone 2 is used. 1 Press the [RECEIVER] button fol- lowed by the [SETUP] button. The main menu appears onscreen. 5 Press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button. 2 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "7. Hardware Setup," and then press [ENTER]. The Hardware Setup menu appears. 7. Hardware Setup 1. Remote Control 2. Zone2 3. Tuner 4. Analog Multich 5. HDMI 3 ENTER Use the Up and Down [ ]/[ ] buttons to select "2. Zone2," and then press [ENTER]. The Zone2 menu appears. 7-2. Zone2 Powered Zone2 Not Act ENTER 4 100 Use the Left and Right [ ]/[ ] buttons to select: Not Act: ZONE 2 SPEAKERS termi- nals deactivated. Act: ZONE 2 SPEAKERS termi- nals activated. When Zone 2 is activated and turned on (see below), the speakers connected to the ZONE 2 SPEAKERS terminals output sound, but the speakers connected to the SURR BACK SPEAKERS terminals do not (when Zone 2 is activated but not used, the surround back speakers work as normal).