Onkyo TXSR705 Owner Manual - Page 89
Correcting Sound and Picture Sync
UPC - 751398007804
View all Onkyo TXSR705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
TX-SR705_En.book Page 89 Monday, May 28, 2007 2:13 PM Advanced Setup-Continued Correcting Sound and Picture Sync When using progressive scanning on your DVD player, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals. You can set it from 0 to 250 milliseconds (msec) in 5 millisecond steps. 1 Press the [RECEIVER] button fol- lowed by the [SETUP] button. The main menu appears onscreen. 2 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "4. Source Setup," and then press [ENTER]. The Source Setup menu appears. 4. Source Setup DVD 1. IntelliVolume 2. A/V Sync 3. Name Edit 4 ENTER ENTER 5 ENTER Use the Up and Down [ ]/[ ] buttons to select "2. A/V Sync," and then press [ENTER]. The A/V Sync menu appears. 4-2. A/V Sync DVD A/V Sync (HDMI Lip Sync 20msec 0msec) Press Enter to see picture. If HDMI Lip Sync is enabled (see page 95), and your TV or display supports HDMI Lip Sync, the HDMI Lip Sync delay time is displayed underneath in parentheses. Press [ENTER] to view the TV picture, and use the Left and Right [ ]/[ ] buttons to adjust the delay from 0 to 250 milliseconds in 5 millisecond steps. 3 Use the INPUT SELECTOR but- Notes: tons on the remote controller to • This setting is not available when the Pure Audio lis- select the input source that you tening mode is used, or the Direct listening mode is want to correct. used with an analog input signal. • This procedure can also be performed on the remote controller by using INPUT SELECTOR buttons. Press and hold, for more than 5 seconds, the INPUT SELECTOR button for the input source that you want to correct. Use the Left and Right [ ]/[ ] buttons to adjust the delay. 89