Onkyo TXSR705 Owner Manual - Page 96
Control - user manual
UPC - 751398007804
View all Onkyo TXSR705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
TX-SR705_En.book Page 96 Monday, May 28, 2007 2:13 PM Advanced Setup-Continued Control This function allows CEC-standard-compatible equip- ment connected to HDMI and -compatible equipment to be operated together with the AV receiver/ AV amplifier. Disable: HDMI Control disabled. Enable: HDMI Control enabled. Notes: • Set to Disable when a connected piece of equipment is not compatible or it is unclear whether the equipment is compatible or not. • If movement is unnatural when set to Enable, change the setting to Disable. • Refer to the connected component's instruction manual for details. ■ Power Control To link the electrical connection of CEC-standard-com- patible equipment and -compatible equipment by means of HDMI, set to Enable. However, it may not be possible to power link equipment, depending on the settings and compatibility of the connected equipment. Disable: Power Control disabled. Enable: Power Control enabled. Notes: • The Power Control setting can be set only when the above Control setting is set to Enable. • HDMI power control only works with HDMI-compat- ible components that support it. • When set to Enable, power consumption will increase. (North American models) • The AV receiver/AV amplifier enters Ready mode when set to Standby. (not North American models) • Refer to the connected component's instruction man- ual for details. ■ TV Control Set to Enable when you want to control the AV receiver/ AV amplifier from an -compatible TV that is connected to HDMI. Disable: TV Control disabled. Enable: TV Control enabled. Notes: • Set to Disable when the TV is not compatible or when it is unclear whether the TV is compatible or not. • The TV Control setting can be set only when the above Control and Power Control settings are both set to Enable. • Refer to the connected component's instruction manual for details. Notes: • After changing the settings of the Control, Power Control, or TV Control, turn off the power to all connected pieces of equipment and then turn on again. Refer to the User's Manuals for all connected pieces of equipment. • When HDMI Audio Out is set to "On" or the TV Control is set to "Enable" and the audio is playing through the TV speakers, if the volume is adjusted on the AV receiver/AV amplifier, the audio will begin to play through the speakers connected to the AV receiver/AV amplifier. If you want to turn off the audio from the AV receiver/ AV amplifier, repeat the set up operation, and the set up for the TV, or turn down the volume to its lowest level. 96