Onkyo TXSR705 Owner Manual - Page 93

TX-SR705_En.book Page 93 Monday, May 28, 2007 2:13 PM Advanced Setup-Continued OSD Setup 1 Press the [RECEIVER] button fol- lowed by the [SETUP] button. The main menu appears onscreen. 2 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "6. Miscellaneous," and then press [ENTER]. The Miscellaneous menu appears. 6. Miscellaneous 1. Volume Setup 2. OSD Setup 3 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "2. OSD Setup," and then press [ENTER]. The OSD Setup menu appears. 6-2. OSD Setup Immediate Display Monitor Type Display Position TV Format On 4 : 3 Bottom Auto 4 ENTER ENTER 5 Use the Up and Down [ ]/[ ] buttons to select the settings, and use the Left and Right [ ]/ [ ] buttons to set them. These settings determine how the operation details are displayed. Immediate Display This preference determines whether operation details are displayed onscreen when an AV receiver/AV amplifier function is adjusted. On: Displayed (default). Off: Not displayed. Even when On is selected, operation details may not be output if the input source is connected to a COMPONENT VIDEO IN or HDMI IN. For optimal video performance, THX recommends that Immediate Display be turned off. Monitor Type With this preference, you can specify the aspect ratio of your TV so that the operation details are displayed properly. 4 : 3: Select if your TV is 4 : 3 (default). 16 : 9: Select if your TV is 16 : 9. Display Position This preference determines where on the screen operation details are displayed. Bottom: Bottom of the screen (default). Top: Top of the screen. TV Format (not North American models) See "TV Format Setup (not North American models)" on page 52. When you've finished, press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button. 93