Onkyo TXSR705 Owner Manual - Page 49
Component Video Setup
UPC - 751398007804
View all Onkyo TXSR705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
TX-SR705_En.book Page 49 Monday, May 28, 2007 2:13 PM First Time Setup-Continued Component Video Setup If you connect to a COMPONENT VIDEO IN, you must assign it to an input selector. For example, if you connect your DVD player to COMPONENT IN 3, you should assign it to the DVD input selector. If you want to output composite and S-Video sources from the COMPONENT VIDEO OUT, select "---," as explained below. Input selector VIDEO IN jack DVD IN 1 VCR/DVR --- CBL/SAT --- GAME/TV --- AUX --- If you've connected your TV to the AV receiver/AV amplifier with a component video cable, you can set the AV receiver/AV amplifier so that composite video and SVideo sources are upconverted* and output by the COMPONENT VIDEO OUT. You can set this for each input selector by selecting the "- - -" option. Composite video, S-Video IN Component video 3 ENTER ENTER 4 ENTER ENTER OUT Composite video, S-Video Component video 1 Press the [RECEIVER] button fol- 5 lowed by the [SETUP] button. The main menu appears onscreen. Use the Up and Down [ ]/[ ] buttons to select "3. Component Video Input," and then press [ENTER]. The Component Video Input menu appears. 1-3. Component Video Input DVD IN 1 VCR/DVR - - - CBL/SAT - - - GAME/TV - - - AUX - - - Use the Up and Down [ ]/[ ] buttons to select an input selector, and then use the Left and Right [ ]/[ ] buttons to select: IN 1: Use the video component connected to COMPONENT VIDEO IN 1. IN 2: Use the video component connected to COMPONENT VIDEO IN 2. IN 3: Use the video component connected to COMPONENT VIDEO IN 3. - - -: Output composite video and S-Video sources from the COMPONENT VIDEO OUT. Press the [SETUP] button. The setup menu closes. 2 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "1. Input/Output Assign," and then press [ENTER]. The Input/Output Assign menu appears. 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video Input 4. Digital Input Notes: • For composite video and S-Video upconversion for the COMPONENT VIDEO OUT, the HDMI Monitor setting must be set to No (see page 47), and the Component Video Input setting must be set to "- - -". See page 28 for more information on video signal flow and upconversion. • This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button. 49