Onkyo TXSR705 Owner Manual - Page 66

TX-SR705_En.book Page 66 Monday, May 28, 2007 2:13 PM Using the Listening Modes Selecting Listening Modes See "About the Listening Modes" on page 71 for detailed information about the listening modes. • The Dolby Digital and DTS listening modes can only be selected if your DVD player is connected to the AV receiver/AV amplifier with a digital audio connection (coaxial or optical). • Listening mode availability depends on the format of the current input signal. Selecting with the Remote Controller SURR STEREO PURE A DIRECT / ALL ST THX Selecting on the AV receiver/AV amplifier PURE AUDIO STEREO LISTENING MODE ■ [PURE AUDIO] button This button selects the Pure Audio listening mode. When this mode is selected, the AV receiver/AV amplifier's display is turned off and only video signals input through HDMI IN can be output. Pressing this button again will select the previous listening mode. ■ [STEREO] button This button selects the Stereo listening mode. ■ LISTENING MODE [ ]/[ ] buttons Pressing these buttons repeatedly cycles through all of the listening modes that can be used with the current input source. ■ [STEREO] button This button selects the Stereo listening mode. ■ [SURR] button This button selects the Dolby Digital and DTS listening modes and the Neural THX Surround listening mode. ■ LISTENING MODE [ ]/[ ] buttons Pressing these buttons repeatedly cycles through all of the listening modes that can be used with the current input source. ■ [PURE A] button This button selects the Pure Audio listening mode. When this mode is selected, the AV receiver's display is turned off and only the HDMI OUT outputs video signals. ■ [DIRECT] button This button selects the Direct listening mode. ■ [THX] button This button selects the THX listening modes. ■ [ALL ST] button This button selects the All Channel Stereo listening mode. 66