Onkyo TXSR705 Owner Manual - Page 56

TX-SR705_En.book Page 56 Monday, May 28, 2007 2:13 PM First Time Setup-Continued 7 ENTER ENTER 8 After the 3rd to the 7th measurement, the following screen appears. Auto Speaker Setup AUDYSSEY Please select "Next" , when measuring next position, and select "finish" , when ending. Next finish (Calculate) Use the Up and Down [ ]/[ ] buttons to select an option, and then press [ENTER]. Next: Select this if you want to measure another listening position. After the 8th measurement has been taken, the procedure automatically proceeds to step 8. finish (Calculate): Select this if you don't want to measure any more listening positions and are ready to calculate the results, then go to step 8. When the measurements are complete, the following screen appears. Auto Speaker Setup AUDYSSEY ENTER ENTER 10 Use the Up and Down [ ]/[ ] buttons to select an option, and then press [ENTER]. The options are: Save: Save the calculated settings and exit the automatic speaker setup. Review SP Config: Review the speaker configuration settings (see "Reviewing the Results" on page 58). Review SP Distance: Review the speaker distance settings (see "Reviewing the Results" on page 58). Review SP Level: Review the speaker level settings (see "Reviewing the Results" on page 58). Cancel: Cancel the automatic speaker setup. If you selected "Save," the results are saved, and the following screen appears. Auto Speaker Setup AUDYSSEY Saving... Calculating... 11 Disconnect the speaker setup microphone. Auto Speaker Setup AUDYSSEY 9 When the calculations are com- plete, the following screen appears. Please unplug microphone. Auto Speaker Setup AUDYSSEY Save Review SP Config Review SP Distance Review SP Level Cancel Notes: • When the automatic speaker setup is complete, the Equalizer Settings (page 82) will be set to "Audyssey." • You can cancel the automatic speaker setup at any point in this procedure simply by disconnecting the setup microphone. 56