Onkyo TXSR705 Owner Manual - Page 94
Changing the AV Receiver/AV, Amplifier's ID - remote code
UPC - 751398007804
View all Onkyo TXSR705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
TX-SR705_En.book Page 94 Monday, May 28, 2007 2:13 PM Advanced Setup-Continued .Changing the AV Receiver/AV Amplifier's ID 1 Press the [RECEIVER] button fol- lowed by the [SETUP] button. The main menu appears onscreen. Note: This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button. 2 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "7. Hardware Setup," and then press [ENTER]. The Hardware Setup menu appears. 7. Hardware Setup 1. Remote Control 2. Zone2 3. Tuner 4. Analog Multich 5. HDMI 3 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "1. Remote Control," and then press [ENTER]. The Remote Control menu appears. 7-1. Remote Control Remote ID 1 4 Use the Left and Right [ ]/[ ] buttons to select a value. Remote ID With this setting, you can change the AV receiver/AV amplifier's remote control ID. You may need to change this if the remote controller's control codes overlap with those of another Onkyo component located in the same room. If you change the AV receiver/AV amplifier's remote control ID, be sure to set the same ID on both the AV receiver/AV amplifier and remote controller (see page 98). The default ID for both is 1. 94