Panasonic AJHD1700P AJHD1700 User Guide - Page 100

Setup menus (continued) No./Item 730*1 REC CH6 731*1 REC CH7 732*1 REC CH8 733*1 REC CUE Description of setting For selecting the input signals to be recorded on the audio CH6 track. 0000 CH5: Audio input CH5 signals 0001 CH6: Audio input CH6 signals 0002 CH7: Audio input CH7 signals 0003 CH8: Audio input CH8 signals 0004 CH5+6: Audio input CH5 and CH6 mixed signals 0005 CH7+8: Audio input CH7 and CH8 mixed signals For selecting the input signals to be recorded on the audio CH7 track. 0000 CH5: Audio input CH5 signals 0001 CH6: Audio input CH6 signals 0002 CH7: Audio input CH7 signals 0003 CH8: Audio input CH8 signals 0004 CH5+6: Audio input CH5 and CH6 mixed signals 0005 CH7+8: Audio input CH7 and CH8 mixed signals For selecting the input signals to be recorded on the audio CH8 track. 0000 CH5: Audio input CH5 signals 0001 CH6: Audio input CH6 signals 0002 CH7: Audio input CH7 signals 0003 CH8: Audio input CH8 signals 0004 CH5+6: Audio input CH5 and CH6 mixed signals 0005 CH7+8: Audio input CH7 and CH8 mixed signals For selecting the input signals to be recorded on the CUE track. 0000 CUE: CUE IN 0001 CH1: Audio input CH1 signals 0002 CH2: Audio input CH2 signals 0003 CH3: Audio input CH3 signals 0004 CH4: Audio input CH4 signals 0005 CH5: Audio input CH5 signals 0006 CH6: Audio input CH6 signals 0007 CH7: Audio input CH7 signals 0008 CH8: Audio input CH8 signals 0009 CH1+2: Audio input CH1 and CH2 mixed signals 0010 CH3+4: Audio input CH3 and CH4 mixed signals 0011 CH5+6: Audio input CH5 and CH6 mixed signals 0012 CH7+8: Audio input CH7 and CH8 mixed signals 0013 CH1j8: Audio input CH1 to CH8 mixed signals No./Item Description of setting 734*1 PB FADE For selecting how to process the audio edit points (IN points and OUT points) during playback. 0000 AUTO: The status established during recording is followed. 0001 CUT: Forcibly cut 0002 FADE: Forcibly faded 735 HD EMBD AUD For selecting whether to superimpose the audio data on the HD serial output. 0000 OFF: The audio data is not superimposed. 0001 ON: The audio data is superimposed. 736 For selecting whether to superimpose the audio data on the SD serial output. SD EMBD AUD 0000 OFF: The audio data is not superimposed. 0001 ON: The audio data is superimposed. 737 MONI MIX For selecting the mixed signals for the headphone monitor (Lch and/or Rch). 0000 OFF: Neither the Lch nor Rch signals are mixed. 0001 L: Only the Lch signals are mixed. 0002 R: Only the Rch signals are mixed. 0003 L/R: Both the Lch and Rch signals are mixed. • At the OFF setting, the signals to be output to monitor L (or monitor R) are switched to CH1, CH2, CH3 and so on each time the "L" or "R" button is pressed. The selected signals are displayed below the audio level meter. • At the L, R or L/R setting, the signals of a multiple number of channels can be mixed and output. When the number key corresponding to the channel whose signals are to be monitored is pressed while the "L" (or "R") button is held down, that channel is selected. The selected channel is displayed below the audio level meter. (Alternatively, the same steps can be taken to de-select a channel which has already been selected.) However, only up to 2 channels among the CH1-CH4 channels and up to 2 channels among the CH5 to CH8 channels can be selected. 738 CH1 CUE SEL For selecting the CH1 output status of the main signal line in the search mode. 0000 OFF: The CUE signal is not output. 0001 ON: The CUE signal is output. For details on the audio output statuses, refer to "Audio outputs in the search mode" on page 103. *1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. The underlining (__) denotes the factory setting mode. 100