Panasonic AJHD1700P AJHD1700 User Guide - Page 46
<In the STOP mode>, For selecting the output signals.
View all Panasonic AJHD1700P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Function menus Function button/item F1 OUTPUT Switching method Setting Toggle TAPE EE Corresponding setup menu item No. 140 OUTPUT Description of setting For selecting the output signals. TAPE: In the STOP mode, the signals played back from the tape are output. During recording or editing (*), simultaneous playback signals are output. *: Setup menu item No.302 (CONFI EDIT) must be set. EE: The input signals selected by the setup menu items No.600 (VIDEO IN SEL) and No.713 (CH1 IN SEL) to No.724 (D IN SEL 78) settings are output. F2 ___ F3 TC/CTL*2 F4 TC CLR*1 ___ ___ Toggle TC UB CTL Press RESET ___ ___ ___ ___ For selecting the time counter display. TC: The time code value is displayed. UB: The user's bit value is displayed. CTL: The control signal (time data) is displayed. For resetting the time counter display. If the F4 button is pressed while the control signal (time data) is displayed on the time counter, it is reset to zero. F5 ___ F6 R INH F1 (SHIFT) PREROL F2 (SHIFT) ___ F3 (SHIFT) OUTREF F4 (SHIFT) CAPSTN F5 (SHIFT) ___ F6 (SHIFT) VARMEM*1 ___ ___ F i toggle Toggle i ADJ ___ OFF ALL PRE NORM V/CTL 0s --- 5s --30s ___ F i toggle F i toggle ___ AUTO INPUT HD_REF SD_REF 2F 4F 8F ___ Toggle OFF ON ___ No. 113 REC INH No. 000 P-ROLL TIME ___ No. 031 OUT REF No. 109 CAP. LOCK ___ ___ ___ Refer to the setup menu. The setting can be changed from OFF to ALL simply by operating the function button without pressing the F button. Refer to the setup menu. ___ Refer to the setup menu. Refer to the setup menu. ___ For selecting the variable memory mode. OFF: The variable memory mode is not used. ON: The status is established in which variable memory playback or variable memory editing is enabled. *1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. *2: CTL cannot be selected when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. TC is selected when the power is turned on. *The underlining (__) denotes the factory setting mode. 46