Panasonic AJHD1700P AJHD1700 User Guide - Page 97

Setup menus (continued) No./Item Description of setting No./Item Description of setting 675 B-CONTRAST 676*3 BLK CLIP For adjusting the contrast (blue) of the LCD monitor on the front panel. 0 j127 : : 127 0 : : 254 127 This function clips the signals below the pedestal level for SD SDI OUT and composite OUT Y (luminance) signals. 0000 OFF: The signals are not clipped. 0001 ON: The signals are clipped. 680*2 CC (F1) BLANK*DW For selecting ON or OFF for the closed caption signals in the first field. 0000 BLANK: The signals are forcibly blanked. 0001 THRU: The signals are not blanked. 681*2 CC (F2) BLANK*DW For selecting ON or OFF for the closed caption signals in the second field. 0000 BLANK: The signals are forcibly blanked. 0001 THRU: The signals are not blanked. 682 This selects the composite output signal in HD mode. 0000 THRU: The signal is output with no VO SETUP setup added. (HD)*UP 0001 ADD22L: The signal is output from line (This menu is 22 with a 7.5% setup added. not displayed for 0002 ADD21L: The signal is output from line 21 AJ-HD1700E.) with a 7.5% setup added. 0002 ADD20L: The signal is output from line 20 with a 7.5% setup added. 683 This selects the composite output signal in SD mode. 0000 THRU: The signal is output with no VO SETUP setup added. (SD)*DW 0001 ADD22L: The signal is output from line (This menu is 22 with a 7.5% setup added. not displayed for 0002 ADD21L: The signal is output from line AJ-HD1700E.) 21 with a 7.5% setup added. 0002 ADD20L: The signal is output from line 20 with a 7.5% setup added. 684 EDH (SD)*DW For selecting whether to superimpose EDH on the serial output signals. 0000 OFF: EDH is not superimposed. 0001 ON: EDH is superimposed. 685*2 ESR MODE (SD)*DW For selecting the operation mode for edge subcarrier reduction (ESR) in the playback circuit. 0000 OFF: ESR is forcibly set to OFF. 0001 AUTO: ESR is automatically set to ON or OFF in accordance with the VTR operation. 686*2 CCR MODE (SD)*DW For selecting the cross color processing during playback. 0000 OFF: The cross color is output as is. 0001 ON: The cross color can be reduced. 687*4 SDI INDEX 0 *DW For selecting whether to superimpose the VIDEO INDEX signal on the SD SDI output signal. 0000 OFF: The VIDEO INDEX signal is not superimposed on the SD SDI output signal. 0001 ON: The VIDEO INDEX signal is superimposed on the SD SDI output signal. 688*2 CC REC 695*1 BLANK LINE For selecting whether to record the closed caption signals which are superimposed on the SD input signal. 0000 OFF: The closed caption signals are not recorded on the tape. 0001 ON: The closed caption signals are recorded on the tape if they are superimposed on the SD input signal. In this case, they are blanked, upconverted and then recorded. • When SDTI has been selected as the input signal, the closed caption data superimposed on the compressed input signals is recorded on the tape in its original form regardless of this menu item's setting. • Setup menu item No.688 does not function when the AJ-UC1700G optional board has not been installed. For selecting ON or OFF for blanking for the vertical blanking period of the video signals during SD tape playback. 0000 BLANK: All the lines are forcibly blanked. 0001 THRU: None of the lines are blanked. 0002 MANU: Blanking ON or OFF is selected on a line-byline basis. When 2 (MANU) is set and the SHIFT button is pressed, the display transfers to the submenu screen where the ON or OFF can be set for each line. Press the SHIFT button again to return the display from the submenu screen. Submenu screen 01 LINE 11&274 : : : : 12 LINE 22&285 0000 BLANK: 0001 THRU: The lines are forcibly blanked. The lines are not blanked. Submenu screen 00 LINE 7&320 : : : : 15 LINE 22&335 0000 BLANK: 0001 THRU: The lines are forcibly blanked. The lines are not blanked *1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. *2: This item is not displayed when the 23/24 Hz, 25 Hz (HD or SD) or 50 Hz mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. *3: This item is not displayed when the 50 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. *4: This item is not displayed when the 23/24 Hz or 25 Hz (HD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. The underlining (__) denotes the factory setting mode. *UP: With HD output (HD tape playback or up-converted output) *DW: With SD output (SD tape playback or down-converted output) 97