Panasonic AJHD1700P AJHD1700 User Guide - Page 18
Rear Panel, The Ch1, Ch2, Ch3, Ch4, Ch5, Ch6, Ch7
View all Panasonic AJHD1700P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Parts and Their Functions Rear panel 8= 4 6579 < 4 AC IN SIGN L GD TC PUSH CUE PUSH MON IN IN L OUT OUT R HD SDI IN OUT 1 OUT 2 OUT 3 MONITOR (SUPER) ACTIVE THROUGH SDTI SD SDI AUDIO IN CH1·2 CH3·4 CH5·6 CH7·8 IN (OPTION) AUDIO CH1·2 OUT CH3·4 CH5·6 CH7·8 CH 1 PUSH AUDIO IN CH 2 PUSH CH 3 PUSH OUT CH 4 PUSH CH 1 AUDIO OUT CH 2 PUSH CH 3 PUSH CH 4 PUSH MONITOR (SUPER) DIGITAL AUDIO ANALOG VIDEO OUT SD REF IN 1 HD REF IN HD REF OUT PARALLEL 2 (WFM) ON 75≠ OFF ON 75≠ OFF ENCODER REMOTE 3 (SUPER) SD REF OUT R E RS-232C M O T E REMOTE IN/OUT REMOTE OUT 21 3 ;: 8 CUE OUT connector The analog signals recorded on the CUE tracks are output through this connector. 9 MONITOR OUT connectors The CH1, CH2, CH3, CH4, CH5, CH6, CH7 and CH8 PCM audio signals or CUE signals are output through these connectors. : ANALOG AUDIO IN connectors These are the analog audio input connectors (for CH1, CH2, CH3 and CH4). 1 AC IN socket Using the power cord supplied, connect one end to this socket and the other end to the power outlet. ; ANALOG AUDIO OUT connectors The analog audio signals (CH1, CH2, CH3 and CH4) are output through these connectors. 2 SIGNAL GND terminal This is connected to the signal ground terminal on the component connected to this VTR in order to minimize noise. It is not a safety ground. 3 Fuse holder A fuse is inserted here. 4 Fan The fan is used to cool down the VTR. If the fan has been stopped due to some kind of problem, "W" appears on the time code display and a beeping sound is heard. If the VTR is made to continue operating in the warning status, the temperature inside the deck rises, and when it exceeds the safety temperature, all the VTR's operations will be shut down. 5 TIME CODE IN connector This connector is used to record an external time code onto the tape. < HD SERIAL DIGITAL COMPONENT AUDIO/VIDEO IN/OUT connector/ACTIVE THRU The HD digital component audio and video signals complying with the SMPTE 292M and 299M standards are input and output through this connector. Signals with the time code, menu or other superimposed information are output from the HD SDI MONITOR. For INPUT CHECK, refer to the INPUT CHECK output table on page 15. = SDTI IN and OUT connectors (SDTI, optional accessory)*1, SD SDI IN/ACTIVE THRU (SD upconverter, optional accessory)*2 *1: These connectors handle compressed data input and output signals complying with the SMPTE 305M and 321M standards. *2: These input connectors enable SD SDI signals complying with the SMPTE 259M-C standard to be up-converted to HD signals and recorded. 6 TIME CODE OUT connector During playback, the playback time code is output through this connector. During recording, the time code generated by the internal time code generator is output. 7 CUE IN connector The analog signals to be recorded on the CUE tracks are input through this connector. Audio signals from a microphone can also be recorded by selecting the j60 dB input mode for setup menu item No.704 (CUE IN LV). • The optional AJ-UC1700G SD serial digital input board and optional AJ-YAC150P SDTI input board cannot be installed at the same time. Install one or the other. • SDTI does not function when the 25 Hz (HD or SD) or 50 Hz mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. 18