Panasonic AJHD1700P AJHD1700 User Guide - Page 86

Setup menus (continued) No./Item Description of setting No./Item Description of setting 116 EJECT LAMP For selecting whether the EJECT lamp is to remain lighted or go off after the cassette tape has been ejected. 0000 MODE1: The EJECT lamp remains lighted. 0001 MODE2: The EJECT lamp goes off. 118*1 SP MODE INH For selecting whether to allow or inhibit recording on a tape which has been written by a format other than DVCPRO HD-LP. 0000 OFF: Recording on the cassette tape is allowed. 0001 ON: Recording on the cassette tape is inhibited. • When 0 (OFF) has been selected, whether recording on the cassette tape is allowed or inhibited is determined by the setup menu item No.113 (REC INH) setting. • The recording format is determined by the setup menu item No.020 (SYS FORMAT) setting. 131 PAGE MODE For selecting what cue point operation is to be performed when the multi cue function has been set to ON. 0000 MANU: Operation is confined within the selected page, and 6 cue points can be registered. 0001 AUTO: When the page whose cue points are being registered becomes full, operation is automatically transferred to the next page, and registration is continued. A total of 60 cue points on up to 10 pages can be registered. 132 ROTA MODE For selecting whether to perform the registration operation if all the cue points have already been registered when the multi cue function has been set to ON. 0000 OFF: No further cue points are registered. 0001 ON: The registration operation is continued. If "MANU" has been selected as the setup menu item No.131 (PAGE MODE) setting, the next cue point is registered at CUE¢1 on the page concerned; if "AUTO" has been selected, it is registered at CUE01. 133 KEY BEEP For setting the volume of the sound heard when the keys are touched. 0000 OFF 0001 LOW 0002 HIGH 134 ALARM BEEP For setting the volume of the alarm tone. 0000 OFF 0001 LOW 0002 HIGH If the fan motor has shut down, the alarm tone is sounded at the HIGH volume level regardless of this setting. *1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. The underlining (__) denotes the factory setting mode. 86 140*1 OUTPUT 141*1 VOLUME 142*1 AUDIO UNITY For selecting the output signals. 0000 EE: : The input signals selected by setup menu items No.600 (VIDEO IN SEL) and No.713 (CH1 IN SEL) to No.724 (D IN SEL 78) are output. : The input signals selected by setup menu items No.600 (VIDEO IN SEL) and No.713 (CH1 IN SEL) to No.724 (D IN SEL 78) are output: 0001 TAPE: The signals played back from the tape are output. : The simultaneous playback signals are output. In order to select the output signals during recording or editing, set setup menu item No.302 (CONFI EDIT). For setting what is to be controlled by the audio volume controls on the front panel. 0000 REC: The controls function as REC volume controls. 0001 PB: The controls function as PB volume controls. 0002 AUTO: Normally, the controls function as PB volume controls. However, during recording or in the EE/INPUT CHECK status, they automatically function as REC volume controls. For selecting the conditions under which the AUDIO UNITY lamp on the front panel is to light. 0000 IN: The lamp lights when all the audio input levels are set to the UNITY level. 0001 OUT: The lamp lights when all the audio output levels are set to the UNITY level. 0002 IN/OUT: The lamp lights when all the audio input and output levels are set to the UNITY level. 143 CASSTT LIGHT 144 TC INPUT For setting whether the lighting of the tape mechanism is to be set to ON or remain OFF. 0000 OFF: The mechanism does not light even when a cassette is inserted. 0001 ON: The mechanism lights when a cassette is inserted. For switching the preset registration method for the time code. 0000 NORMAL: The time code is input starting with the leftmost digit. 0001 REV: The time code is input from the high-order digit but is displayed from the right-most digit. 145 FRONT LCD For selecting whether the LCD monitor display on the front panel is to be turned on or off. 0000 OFF: The display is turned off. 0001 ON: The display is turned on or off in synchronization with the screen saver operation for the time code display area.