Panasonic AJHD1700P AJHD1700 User Guide - Page 81
Setup Menus, Basic, <basic>
View all Panasonic AJHD1700P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Setup menus No./Item Description of setting No./Item Description of setting 000 P-ROLL TIME 001 LOCAL ENA For setting the preroll time. Any time from 0 to 30 seconds can be set in 1- second increments. 0000 0s : : 0005 5s : : 0030 30s • During automatic editing (PREVIEW or AUTO EDIT), no operations are performed if the preroll time is set to 0 seconds. • If the phases are to be synchronized between two decks for editing as per the setup menu item No.004 (SYNCHRONIZE) setting, set the preroll time to at least 2 seconds. For selecting the transport system buttons which can be operated on the front panel in the REMOTE mode. 0000 DIS: No buttons can be operated. 0001 ST&EJ: Only the STOP and EJECT buttons can be operated. 0002 ENA: All the buttons except for the RECORDER and PLAYER buttons can be operated. The following buttons and dials function at all times regardless of this setting: Audio input/output level control dials, audio channel selector buttons, number keys, function buttons, direct menu button, ASSEM button, INSERT button, ADJ dial, headphone volume control dial, MONITOR SELECT button, METER (FULL/FINE) selector switch, REMOTE button. 002*1 TAPE TIMER 003 REMAIN SEL For selecting the 12- or 24-hour system for the CTL counter display. 0000 d12h: 12-hour system display 0001 24h: 24-hour system display For selecting whether or not to display REMAIN (remaining tape time) on the superimposed display of the HD SDI MONITOR, SD SDI MONITOR and VIDEO OUT3 connectors. 0000 OFF: The remaining tape time is not displayed. 0001 2L: The remaining tape time is displayed on the second line. 0002 1L: The remaining tape time is displayed on the first line. 0003 R/TTL: The remaining tape time is displayed on the first line, and the total tape time is displayed on the second line. • When setting 1 (2L) has been selected, the remaining tape time is not displayed if 0 (TIME) is selected as the setup menu item No.006 (DISPLAY SEL) setting. • When setting 3 (R/TTL) has been selected, the remaining tape time is not displayed if 0 (TIME) is selected as the setup menu item No.006 (DISPLAY SEL) setting. 004*1 SYNCHRONIZE For setting whether or not to synchronize the phases between two decks. 0000 OFF: The phases are not synchronized. The edit points will be off by several frames but editing will be commenced more promptly. 0001 ON: The phases are synchronized. Error-free editing can be performed. 005 SUPER For selecting whether or not to superimpose the display of the time code or other data onto the HD SDI MONITOR, SD SDI MONITOR and VIDEO OUT3 connectors. 0000 OFF: The time code or other data is not displayed. 0001 ON: The time code or other data is displayed. 006 DISPLAY SEL For selecting the time code and other displays to be superimposed onto the HD SDI MONITOR, SD SDI MONITOR and VIDEO OUT3 connectors. 0000 TIME: Only the time is displayed. 0001 T&STA: The time and operation mode are displayed. 0002 T&S&M: The time, operation mode and mode are displayed. 0003 T&RT: The time and REC TIME are displayed. 0004 T&YMD: The time and REC DATE (year/month/day) are displayed. 0005 T&MDY: The time and REC DATE (month/day/year) are displayed. 0006 T&DMY: The time and REC DATE (day/month/year) are displayed. 0007 T&UB: Data and user's bit are displayed. However, when UB has been selected with the F3 (TC/CTL) on the HOME menu, the time code is displayed after the user's bit. 0008 T&CTL: Data and CTL data are displayed. However, when CTL has been selected with the F3 (TC/CTL) on the HOME menu, the time code is displayed after the CTL data. 0009 T&T: Data and time code are displayed. (See Notes on next page.) *1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item. The underlining (__) denotes the factory setting mode. 81