Panasonic AJHD1700P AJHD1700 User Guide - Page 54

Function menus Clearing registered points $ Clearing all the registered points together When F5 (AL CLR) on the menu is pressed while the F button is held down, all the cue point data currently selected is cleared. The range of the points which are cleared is as follows depending on the setting for F3 (PAGE) on the menu. When "MANU" is set: All the points on the currently selected page are cleared. When "AUTO" is set: All the points on all the pages are cleared. After clearing, the search and registered points appear as follows depending on the setting for F3 (PAGE) on the menu. When "MANU" is set: A return is made to the top (CUE¢1) of the page concerned. When "AUTO" is set: A return is made automatically to the top (CUE01) of the first page. * Points are cleared whether "ENTRY" (cue point registration mode) or "SEARCH" (search mode) is selected as the setting for [ F3 ] (MODE) on the menu. $Clearing individual registered points When the F4 (CLR) button on the menu is pressed, the currently selected cue point data is cleared. * The point is cleared only when "ENTRY" (cue point registration mode) is selected as the setting for F3 ] (MODE) on the menu. Search operations Turn the ADJUST dial to highlight the desired registered point. When the PREROLL button is pressed, the preroll operation is initiated. The tape will not be prerolled if no cue points have been registered. Since the tape is not prerolled even if the PREROLL button is pressed when the cue point registration mode is established, be absolutely sure to check that the search mode is established. (The time selected by the menu [ F5 (CU-ROL) setting, which is different from the normal preroll time, takes effect as the preroll time in this mode.) Function button/item F1 PREV F2 NEXT F3 MODE F4 CLR F5 AL CLR Switching method Press Setting ___ Press ___ Toggle Press SEARCH ENTRY ___ FiPress ___ F6 ___ F2 (SHIFT) CARD F3 (SHIFT) PAGE F4 (SHIFT) ROTATE F5 (SHIFT) CU-ROL F6 (SHIFT) ___ ___ ___ FiPress ___ Toggle Toggle Toggle i ADJ ___ MANU AUTO OFF ON 0s --- 5s --15s ___ Corresponding setup menu item ___ Description of setting For multi-cue page forward scrolling. ___ For multi-cue page reverse scrolling. ___ For selecting the search or cue point registration mode. ___ ___ ___ For clearing the currently selected cue data. ENTRY must be selected as the F3 (MODE) setting. When MANU is selected by SHIFT + F3 (PAGE): All the cue data on the currently displayed page is cleared. When AUTO is selected by SHIFT + F3 (PAGE): All the cue data on all the pages is cleared. ___ ___ For calling the MULTI CUE file operation menu. No. 131 PAGE MODE No. 132 ROTA MODE No. 011 CU-ROLL TIME ___ Refer to the setup menu. Refer to the setup menu. Refer to the setup menu. ___ *The underlining (__) denotes the factory setting mode. * This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. 54