Panasonic DMC-G10 Operating Instructions - Page 101

Advanced (Recording pictures) Press the shutter button fully to stop recording. • Sound will be heard when pressing the shutter button fully indicating start/stop of motion picture recording. Sound volume can be set in [BEEP] (P31). • If the card becomes full in the middle of recording, the camera stops recording automatically. ∫ About the Flicker Reduction Function If there is marked flicker or striping when recording motion pictures, the Flicker Reduction Function can be set to [ON]. 1 Press [,]. • The Flicker Reduction Function will be forcefully activated, and the shutter speed will be adjusted to 1/100. 2 Rotate the rear dial. • It is possible to select the shutter speed to adjust from 1/50, 1/60, 1/100, or 1/120, and adjust to the optimal setting while viewing the screen. When set to Intelligent Auto Mode • When Intelligent Auto Mode is selected in step 1, motion picture recording matching to the subject or recording situation can be performed. ∫ Scene detection When the camera identifies the optimum scene, the icon of the scene concerned is displayed in blue for 2 seconds, after which its color changes to the usual red. ¦> [i-PORTRAIT] [i-SCENERY] [i-LOW LIGHT] [i-MACRO] • [¦] is set if none of the scenes are applicable, and the standard settings are set. • When [ ] is selected, the camera automatically detects a person's face, and it will adjust the focus and exposure. (Face Detection) (P70) Note • Refer to P41 for settings in Intelligent Auto Mode. • Due to conditions such as the ones below, a different scene may be identified for the same subject. - Subject conditions: When the face is bright or dark, the size of the subject, the color of the subject, the distance to the subject, the contrast of the subject, when the subject is moving - Recording conditions: Sunset, Sunrise, under low brightness conditions, when the camera is shaken, when zoom is used VQT2S62 101