Panasonic DMC-G10 Operating Instructions - Page 67

Advanced (Recording pictures) ∫ Changing the settings for [STEP] and [SEQUENCE] in Auto Bracket 1 Select [AUTO BRACKET] in the [REC] Mode menu. (P28) 2 Press 3/4 to select [STEP] or [SEQUENCE] and then press 1. 3 Press 3/4 to select the setting and then press [MENU/SET]. Item [STEP] Settings [3•1/3] (3 pictures) [3•2/3] (3 pictures) [5•1/3] (5 pictures) [5•2/3] (5 pictures) [7•1/3] (7 pictures) [7•2/3] (7 pictures) Item [SEQUENCE] Settings [0/`/_] [`/0/_] 4 Press [MENU/SET] twice to close the menu. • You can also press the shutter button halfway to close the menu. Note • When taking pictures using Auto Bracket after setting the Exposure Compensation range, the pictures taken are based on the selected Exposure Compensation range. • The exposure may not be compensated with Auto Bracket depending on the brightness of the subject. • The Auto Review function is activated regardless of the Auto Review setting. (Will not hold) You cannot set the Auto Review function in the [SETUP] menu. • When the flash is activated, you can take only 1 picture. • Set number of pictures cannot be recorded if the recordable number of pictures is less than set number of pictures. • Settings for Multi Film Bracket have priority during the Multi Film Bracket recording (P83). VQT2S62 67