Panasonic DMC-G10 Operating Instructions - Page 174
The brightness or the hue of the recorded picture is different from the actual
![]() |
View all Panasonic DMC-G10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Others The recorded picture looks rough. Noise appears on the picture. • Is the ISO sensitivity high or the shutter speed slow? (ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.) > Decrease the ISO sensitivity. (P79) > Increase the setting for [NOISE REDUCTION] in [FILM MODE] or lower the setting for each of the items other than [NOISE REDUCTION]. (P82) > Take pictures in bright places. > Set the [LONG SHTR NR] to [ON]. (P120) • Is the [PICTURE SIZE] (P114) or the [QUALITY] (P115) set low? • Is the [DIGITAL ZOOM] set? (P120) Under fluorescent lighting, flicker or horizontal bars may be seen. • This is characteristic of MOS sensors which serve as the camera's pickup sensors. This is not a malfunction. • If there is marked flicker or striping when recording motion pictures, the Flicker Reduction Function will be forcefully activated by setting the Flicker Reduction Function to [ON] (P101), which will adjust the shutter speed to 1/100. It is possible to select the shutter speed to adjust from 1/50, 1/60, 1/100, or 1/120 by rotating the rear dial. The brightness or the hue of the recorded picture is different from the actual scene. • If recording under fluorescent light, the brightness or the hue may change slightly when the shutter speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not a malfunction. Reddish horizontal streaks appear on the LCD monitor during recording. • This is characteristic of MOS sensors which serve as the camera's pickup sensors. It appears when the subject has a bright part. Some unevenness may occur in the surrounding areas, but this is not a malfunction. It is recorded in motion pictures but is not recorded on still pictures. • It is recommended that you take pictures while taking care not to expose the screen to sunlight or any other source of strong light. Bright spot not in subject is recorded. • This could be an inactive pixel. Perform the [PIXEL REFRESH] (P128) in the [CUSTOM] menu. You cannot compensate the exposure. • Are you in Exposure Compensation operation? > Press the rear dial to switch to Exposure Compensation operation. (P63) Subject cannot be locked. (AF Tracking not possible) • Set the AF area to the distinctive color of the subject if there is a part that is different from the surrounding color. (P71) 174 VQT2S62
![](/manual_guide/products/panasonic-dmcg10-operating-instructions-549924b/174.png)