Panasonic DMC-G10 Operating Instructions - Page 65

Advanced (Recording pictures) ∫ Focusing in Burst Mode The focus changes depending on the setting for [FOCUS PRIORITY] (P126) in the [CUSTOM] menu and the Focus Mode setting. Focus Mode Focus Priority Focus ON AFS At the first picture OFF AFC¢1 ON OFF Normal focusing¢2 Predicted focusing¢3 MF - Focus set with Manual Focus ¢1 When subject is dark, the focus is fixed on the first picture. ¢2 The burst speed may become slower because the camera is continuously focusing on the subject. ¢3 Burst speed takes priority, and focus is estimated within possible range. Note • We recommend using the remote shutter (DMW-RSL1; optional) when you want to keep the shutter button pressed fully while taking pictures in Burst Mode. Refer to P160 for information about the remote shutter. • When the burst speed is set to [H], the exposure and White Balance are fixed at the settings used for the first picture for the subsequent pictures as well. When the burst speed is set to [M] or [L], they are adjusted each time you take a picture. • If you are following a moving subject while taking pictures in a place indoors, outdoors etc. where there is a large difference between the light and shade (landscape), it may take time until the exposure is stable. If burst is used at this time, the exposure may not become optimal. • Since the shutter speed becomes slower in dark places, the burst speed (pictures/second) may become slower. • When set to [H], the Auto Review function is activated regardless of the Auto Review setting. (Will not hold) You cannot set the Auto Review function in the [SETUP] menu. When set to [M] or [L], Live View is displayed between burst frames. • When the flash is activated, you can take only 1 picture. • White Balance Bracket (P79) will record 3 pictures at 1 recording, so it will take longer to be able to take the next picture. • Maximum of 3 films will be recorded depending on the Multi Film Bracket setting during the Multi Film Bracket recording (P83). VQT2S62 65