Panasonic DMC-G10 Operating Instructions - Page 155

Connecting to other equipment Note • Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction. • Turn the camera off before connecting or disconnecting the AC adaptor (P161). • Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable. Selecting a single picture and printing it Press 2/1 to select the picture and then press [MENU/SET]. • The message disappears in about 2 seconds. Press 3 to select [PRINT START] and then press [MENU/SET]. • Refer to P156 for the items which can be set before starting to print the pictures. • Press [MENU/SET] to cancel printing halfway. • Disconnect the USB connection cable after printing. PictBridge 100_0001 PLEASE SELECT THE PICTURE TO PRINT SELECT MULTI PRINT PRINT MENU SINGLE SELECT PRINT START PRINT WITH DATE OFF NUM. OF PRINTS 1 PAPER SIZE PAGE LAYOUT CANCEL SELECT SET MENU Selecting multiple pictures and printing them Press 3. Press 3/4 to select an item and then press [MENU/SET]. • If the print check screen has appeared, select [YES], and print the pictures. PictBridge MULTI SELECT SELECT ALL PRINT SET (DPOF) FAVORITE CANCEL SELECT SET MENU Item Description of settings [MULTI SELECT] Multiple pictures are printed at one time. • Press 3/4/2/1 to select the pictures, and then When [DISPLAY] is pressed, [é] appears on the pictures to be printed. (When [DISPLAY] is pressed again, the setting is canceled.) • After the pictures have been selected, press [MENU/SET]. [SELECT ALL] Prints all the stored pictures. [PRINT SET (DPOF)] [FAVORITE]¢ Prints the pictures set in [PRINT SET] only. (P143) Prints the pictures set as favorites only. (P134) ¢ Only when [FAVORITE] is at [ON] and when there are pictures set as favorites. (P134) VQT2S62 155