Panasonic DMC-G10 Operating Instructions - Page 102

Advanced (Recording pictures) Changing the settings for the recording quality Select [REC QUALITY] from the [MOTION PICTURE] Mode menu, and press 1. (P28) Press 3/4 to select the item and then press [MENU/SET]. Item ([HD]) ¢([WVGA]) ([VGA]) ([QVGA]) Picture size 1280k720 pixels 848k480 pixels 640k480 pixels 320k240 pixels fps Aspect ratio 30 16:9 30 30 4:3 30 ¢This item cannot be set in the Intelligent Auto Mode. • [ ] can be enjoyed on the TV as high quality motion picture by using the HDMI mini cable (optional). For details, see "Playing back on the TV with HDMI socket" on P147. Press [MENU/SET] to close the menu. • You can also press the shutter button halfway to close the menu. Note • Refer to P122 for the [MOTION PICTURE] Mode menu. • The flash setting is fixed to [Œ]. • Use a card with SD Speed Class¢ with "Class 6" or higher when recording motion pictures. ¢ SD Speed Class is the speed standard regarding continuous writing. • Refer to P185 for information about the available recording time. • The available recording time displayed on the screen may not decrease regularly. • Depending on the type of the card, the card access indication may appear for a while after recording motion pictures. This is not a malfunction. • When recording a motion picture, do not cover the microphone with your fingers or other objects. • The operational sound of the zoom or button operation may be recorded when it is operated during the recording of a motion picture. • The screen may be blacked out momentarily, or the unit may record noise due to static electricity or electromagnetic waves etc. depending on the environment of the motion picture recording. • When operating the zoom when recording motion pictures, it may take time to come into focus. • When the [EX. OPT. ZOOM] is set to [ON], the angle of view will change when the screen is switched between the still picture screen and motion picture screen, because the zoom factor is different between still pictures and motion pictures. (P47) • The ISO sensitivity will be set to [AUTO] when recording motion pictures. • When recording a motion picture, [STABILIZER] will be fixed to [MODE1] even if it is set to [MODE2] or [MODE3]. • Set the [FILM MODE] by using the Quick Menu (P30). • When recording motion pictures, the following functions cannot be used. - [ ] in the AF Mode (It will switch to Multi Auto Focus Mode for motion pictures.) - Direction Detection Function - [FACE RECOG.] 102 VQT2S62