Panasonic DMC-G10 Operating Instructions - Page 176

Others Flash The flash is not activated. • Is the flash closed? > Slide the [ OPEN] lever to open the flash. (P57) The flash is activated 2 times. • The flash is activated 2 times. The interval between the first and second flash is longer when Red-eye Reduction (P59) is set so the subject should not move until the second flash is activated. LCD monitor/Viewfinder The LCD monitor turns off although the camera is turned on. • The LCD monitor turns off when [AUTO LCD OFF] (P32) is selected for the [ECONOMY] Mode. [This does not happen when using the AC adaptor (P161).] The LCD monitor/Viewfinder is too bright or dark. > Adjust the brightness of the LCD monitor/viewfinder to a proper level. (P31) • [POWER LCD] is activated. (P32) It may flicker for an instant or the brightness of the screen may change significantly for an instant. • This occurs due to the aperture of the lens changing when the shutter button is pressed half-way, or when the brightness of the subject changes. This is not a malfunction. The picture is not displayed on the LCD monitor. • Does the picture appear on the viewfinder? > Press [LVF/LCD] to switch to LCD monitor display. (P36) • Is the LCD monitor switched off? > Switch the display by pressing [DISPLAY]. (P54) LCD monitor and viewfinder do not switch when [LVF/LCD] is pressed. • It is only displayed on the LCD monitor when the camera is connected to a PC or printer. Black, red, blue and green dots appear on the LCD monitor. • This is not a malfunction. These pixels do not affect the recorded pictures. Noise appears on the LCD monitor. • In dark places, noise may appear to maintain the brightness of the LCD monitor. 176 VQT2S62