Panasonic DMC-G10 Operating Instructions - Page 116
Stabilizer], Flash]
View all Panasonic DMC-G10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Advanced (Recording pictures) [STABILIZER] For details on [REC] Mode menu settings, refer to P28. Using one of these modes, jitter during picture taking is detected, and the camera automatically compensates the jitter, enabling jitter-free images to be taken. Applicable modes: [OFF]¢ [MODE1]: Jitter is always compensated during [REC] Mode. [MODE2]: The jitter is compensated for when the shutter button is pressed. [MODE3]: Camera shake is corrected for up/down movements. This mode is ideal for panning (a method of taking pictures which involves turning the camera to track the movements of a subject which continues to move in a fixed direction). Note ¢This can be selected only when using a lens without the [O.I.S.] switch. - There is no [O.I.S.] switch on the 14 - 42 mm/F3.5 - 5.6 lens included in DMC-G10K. • Confirm that the [O.I.S.] switch on the lens is set to [ON] when using a lens with the [O.I.S.] switch. • [STABILIZER] cannot be selected when a lens without Stabilizer function is used. • The stabilizer function may not be effective in the following cases. - When there is a lot of jitter. - When the zoom magnification is high. - When using the Digital Zoom. - When taking pictures while following a moving subject. - When the shutter speed becomes slower to take pictures indoors or in dark places. Be careful of camera jitter when you press the shutter button. • The panning effect in [MODE3] is more difficult to achieve in the following cases. - In brightly lit places such as in broad daylight on a summer's day - When the shutter speed is faster than 1/100th of a second. - When you move the camera too slowly because the subject is moving slowly. (The background will not become a blur.) - When the camera does not keep up with the subject satisfactorily • We recommend taking pictures with the viewfinder when panning in [MODE3]. • The setting is fixed to [MODE1] even if it is set to [MODE2] or [MODE3] in recording motion pictures. [FLASH] For details on [REC] Mode menu settings, refer to P28. You can switch the flash setting. Applicable modes Note • Refer to P57 for details. 116 VQT2S62