Panasonic DMC-G10 Operating Instructions - Page 22
About the [CHARGE] indicator, Charging time, Battery indication, The [CHARGE], indicator turns on,
![]() |
View all Panasonic DMC-G10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Preparation ∫ About the [CHARGE] indicator The [CHARGE] indicator turns on: The [CHARGE] indicator turns off: The [CHARGE] indicator A is turned on and charging will start. The [CHARGE] indicator A of the charger will turn off once the charging has completed without any problem. • When the [CHARGE] indicator flashes - The battery temperature is too high or too low. Please charge the battery again in a temperature between 10 oC to 30 oC (50 oF to 86 oF). - The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth. ∫ Charging time Charging time Approx. 155 min • The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used. The charging time for the battery in hot/cold environments or a battery that has not been used for a long time may be longer than normal. Charging time and number of recordable pictures with the optional battery pack (DMW-BLB13PP) are the same as above. ∫ Battery indication The battery indication is displayed on the screen. [It does not appear when you use the camera with the AC adaptor (P161) connected.] • The indication turns red and blinks if the remaining battery power is exhausted. (The status indicator also blinks) Recharge the battery or replace it with a fully charged battery. Note • Do not use any other AC cables except the supplied one. • The battery becomes warm after using it and during and after charging. The camera also becomes warm during use. This is not a malfunction. • The battery can be recharged even when it still has some charge left, but it is not recommended that the battery charge be frequently topped up while the battery is fully charged. (Since characteristic swelling may occur.) • Do not leave any metal items (such as clips) near the contact areas of the power plug. Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the resulting heat generated. 22 VQT2S62
![](/manual_guide/products/panasonic-dmcg10-operating-instructions-549924b/22.png)