Panasonic DMC-G10 Operating Instructions - Page 80

Advanced (Recording pictures) ISO sensitivity Recording location (recommended) Shutter speed Noise 100 When it is light (outdoors) Slow Less 6400 When it is dark Fast Increased ISO sensitivity Settings AUTO¢ ¢ (Intelligent) The ISO sensitivity is automatically adjusted according to the brightness. The ISO sensitivity is adjusted according to the movement of the subject and the brightness. 100/200/400/800/1600/3200/ 6400 The ISO sensitivity is fixed to various settings. (When the [ISO INCREMENTS] in [REC] Mode menu (P119) is set to [1/3 EV], items of ISO sensitivity that can be set will increase.) ¢ When the [ISO LIMIT SET] of [REC] Mode menu (P119) is set to anything except [OFF], it is set automatically within the value set in [ISO LIMIT SET]. It is set as following when the [ISO LIMIT SET] is set to [OFF]. • When [AUTO] is selected, ISO sensitivity is adjusted automatically depending on brightness within a maximum setting of [ISO400]. • When setting to [ ], ISO sensitivity will adjust automatically depending on brightness within the maximum setting of [ISO800]. ([ISO400] when the flash is used) ∫ About [ ] (Intelligent ISO sensitivity control) The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the movement of the subject and brightness of the scene to minimize the jitter of the subject. • The shutter speed is not fixed when the shutter button is pressed halfway. It is continuously changing to match the movement of the subject until the shutter button is pressed fully. Confirm the actual shutter speed on the information display for the picture being played back. Note • The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the amount of picture noise. • Refer to P60 for the flash range. • Depending on the brightness and how fast the subject is moving, jitter may not be avoided even if [ ] is selected. • Movements may not be detected when a moving subject is small, when a moving subject is at the edge of the screen or when a subject has moved at the very moment when the shutter button was pressed fully. • The setting is fixed to [ ] in the following cases. - In [BABY1]/[BABY2] and [PET] in Scene Mode - In [INDOOR PORTRAIT], [NORMAL SPORTS], [OUTDOOR SPORTS] and [INDOOR SPORTS] in Advanced Scene Mode • Program Shift cannot be activated when the ISO sensitivity is set to [ ]. • You cannot select [ ] in Shutter-Priority AE Mode and Manual Exposure Mode. Also, you cannot select [AUTO] in Manual Exposure Mode. • To avoid picture noise, we recommend reducing the ISO sensitivity, setting [NOISE REDUCTION] in [FILM MODE] towards [ _] or setting the items except [NOISE REDUCTION] towards [`] to take pictures. (P82) • When [DIRECT AF AREA] (P125) is set to [ON], the operations on the cursor buttons translate to movements of the AF area. Set using the Quick Menu (P30). 80 VQT2S62