Panasonic DMC-G10 Operating Instructions - Page 83
Select either [MULTI FILM 1], [MULTI FILM 2], or
View all Panasonic DMC-G10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Advanced (Recording pictures) Multi Film Bracket It will take pictures changing the type of film in accordance with the setting every time the shutter button is pressed. (Up to 3 pictures) Press 2/1 to select [MULTI FILM]. Select either [MULTI FILM 1], [MULTI FILM 2], or [MULTI FILM 3] with 3/4, and then select the film to be set for each with 2/1. • You can also use the rear dial to set. • [OFF] can be selected only for [MULTI FILM 3]. Press [MENU/SET] to set. Press [MENU/SET] to close the menu. • You can also press the shutter button halfway to close the menu. Focus on the subject and take a picture. • It will continuously take pictures by keeping the shutter button pressed when it is set to Burst Mode. (Up to 3 pictures) • When using a self-timer, up to 3 pictures with set film will be taken if the shutter button is pressed. (It will operate same as [ ] even if it is set to [ ].) • Multi film indication ([ ]) displayed on the screen will flash until all pictures of preset amount are taken. Note • [STANDARD] is registered in [MULTI FILM 1], [MULTI FILM 2] and [OFF] is registered in [MULTI FILM 3] at the time of purchase. • White Balance Bracket will be disabled when the Multi Film Bracket is set. • Motion pictures are recorded with the settings for the [MULTI FILM 1] setting. VQT2S62 83