Panasonic DMC-G10 Operating Instructions - Page 86
About [B] Bulb
![]() |
View all Panasonic DMC-G10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Advanced (Recording pictures) ∫ About [B] (Bulb) If you set the shutter speed to [B], the shutter stays open while the shutter button is pressed fully (up to about 4 minutes). The shutter closes if you release the shutter button. Use this when you want to keep the shutter open for a long time to take pictures of fireworks, a night scene etc. • If you set the shutter speed to [B], [B] is displayed on the screen. • When you take pictures with the shutter speed set to [B], use a sufficiently charged battery. (P21) • We recommend using a tripod or the remote shutter (DMW-RSL1; optional) when you take pictures with the shutter speed set to [B]. Refer to P160 for information about the remote shutter. • When you take pictures with the shutter speed set to [B], noise may become visible. To avoid picture noise, we recommend setting [LONG SHTR NR] in the [REC] Mode menu to [ON] before taking pictures. (P120) • The Manual Exposure Assistance does not appear. Note • The brightness of the LCD monitor/Viewfinder may differ from the brightness of the actual pictures. Check the pictures using the playback screen. • If the exposure is not adequate, the aperture value and the shutter speed turn red and blink when the shutter button is pressed halfway and [ ] for flash cannot be set. • The [SENSITIVITY] is automatically set to [ISO100] when you switch the Recording Mode to Manual Exposure while the [SENSITIVITY] is set to [AUTO] or [ ] (Intelligent). • If you press the shutter button fully when the shutter speed is slow, the shutter speed on the screen counts down. • When you use a lens with an aperture ring, the aperture ring setting takes priority. 86 VQT2S62
![](/manual_guide/products/panasonic-dmcg10-operating-instructions-549924b/86.png)