Panasonic DMC-G10 Operating Instructions - Page 63
Compensating the Exposure
![]() |
View all Panasonic DMC-G10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Advanced (Recording pictures) [REC] Mode: Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. Look at the following examples. Underexposed Properly exposed Overexposed Compensate the exposure towards positive. Compensate the exposure towards negative. Press the rear dial to switch to Exposure Compensation operation. Rotate the rear dial to compensate the exposure. A Exposure Compensation value B [EXPO.METER] • Select [0] to return to the original exposure. • Rotate the rear dial to display the [EXPO.METER]. (P127) (However, it does not appear in ñ/ /¿/ / / / / Mode.) Take a picture. AB Note • EV is an abbreviation of [Exposure Value]. It refers to the amount of light given to the CCD by the aperture value and the shutter speed. • The set exposure value is memorized even if the camera is turned off. However, the exposure value during the Intelligent Auto Mode is not memorized. • The compensation range of the exposure will be limited depending on the brightness of the subject. • Rotate the rear dial slowly but surely. • When the aperture and shutter speed values are displayed in the screen in the Program AE Mode, Program Shift operation and Exposure Compensation operation is switched every time the rear dial is pressed. • In the Aperture-Priority AE Mode, Aperture Setting operation (P84) and Exposure Compensation operation is switched every time the rear dial is pressed. • In the Shutter-Priority AE Mode, Shutter Speed Setting operation (P84) and Exposure Compensation operation is switched every time the rear dial is pressed. • In Quick Menu (P30) in [ ] (LCD monitor style), after selecting the Exposure Compensation display using 2/1 or the rear dial, you can compensate the exposure with 3/4. • In Quick Menu in [ ] (viewfinder style), after selecting the Exposure Compensation display using the rear dial or 2/1, pressing the rear dial or [MENU/SET] will allow you to compensate the exposure with the rear dial or 2/1. VQT2S62 63
![](/manual_guide/products/panasonic-dmcg10-operating-instructions-549924b/63.png)