Panasonic DMC-G10 Operating Instructions - Page 18
Attach the lens cap., Press the lens release button, while, turning the lens as far as possible
![]() |
View all Panasonic DMC-G10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Preparation ∫ Optical Image Stabilizer The lens included in DMC-G10K has a stabilizer function. • There is no [O.I.S.] switch on the 14 - 42 mm/F3.5 - 5.6 lens included in DMC-G10K. Set the [STABILIZER] settings in the [REC] Mode menu. (P116) When using a lens with an [O.I.S.] switch, it is Example when a lens with the possible to set to enable the Optical Image Stabilizer [O.I.S.] switch is mounted. by switching the [O.I.S.] switch on the lens to [ON]. • You can change the Optical Image Stabilizer Mode in the [REC] Mode menu. (P116) It is set to [MODE1] at the time of purchase. • It is recommended to disable the Optical Image Stabilizer when using a tripod. [ ] is displayed on the screen at that time. Detaching a lens from the camera body Attach the lens cap. Press the lens release button D while turning the lens as far as possible in the direction of the arrow to detach it. • Always attach the body cap to the camera body so that dirt or dust does not get inside. • Attach the lens rear cap so that the lens contact point does not get scratched. Note • Change lenses where there is not a lot of dirt or dust. Refer to P166 when dirt or dust gets on the lens. • When you turn the camera off or carry the camera, attach the lens cap to protect the surface of the lens. • Be careful not to lose the lens cap, the lens rear cap and the body cap. 18 VQT2S62
![](/manual_guide/products/panasonic-dmcg10-operating-instructions-549924b/18.png)