Panasonic DMC-G10 Operating Instructions - Page 119

Advanced (Recording pictures) [I.EXPOSURE] (Intelligent exposure adjustment) For details on [REC] Mode menu settings, refer to P28. Contrast and exposure will be adjusted automatically when there is a big difference in brightness between the background and subject, to bring the image close to how you see. Applicable modes: [OFF]/[LOW]/[STANDARD]/[HIGH] Note • Even when the [SENSITIVITY] is set to [ISO100]/[ISO125], [SENSITIVITY] may be set higher than [ISO100]/[ISO125] if the picture is taken with [I.EXPOSURE] set to valid. • Compensation effect may not be achieved depending on the conditions. • [ ] in the screen turns to yellow when [I.EXPOSURE] is in effect. • [LOW], [STANDARD], or [HIGH] represents the maximum range of effect. [ISO LIMIT SET] For details on [REC] Mode menu settings, refer to P28. It will select optimal ISO sensitivity with set value as limit depending on the brightness of the subject. Applicable modes: [OFF]/[200]/[400]/[800]/[1600] Note • The upper limit of the ISO sensitivity can be set. • The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the amount of picture noise. • It will work when the [SENSITIVITY] is set to [AUTO] or [ ]. [ISO INCREMENTS] For details on [REC] Mode menu settings, refer to P28. ISO sensitivity settings between [ISO100] and [ISO6400] are changed for every 1/3 EV. Applicable modes: [1/3 EV]: [1 EV]: [100 ]/[125 ]/[160]/[200 ]/[250 ]/[320 ]/[400]/[500 ]/[640 ]/[800 ]/[1000 ]/[1250 ]/ [1600 ]/[2000 ]/[2500 ]/[3200 ]/[4000]/[5000]/[6400] [100 ]/[200 ]/[400]/[800 ]/[1600 ]/[3200 ]/[6400] Note • When the setting is changed from [1/3 EV] to [1 EV], ISO sensitivity will be set to value closest to the value set during the [1/3 EV]. (Set value will not restore when the setting is changed back to [1/3 EV]. It will stay as the setting selected for [1 EV].) VQT2S62 119