Panasonic DMC-G10 Operating Instructions - Page 25

About the Card Access to the card The access indication lights red when pictures are being recorded on the card. Preparation Card The following cards which conform to the SD video standard can be used with this unit. (These cards are indicated as card in the text.) Type of card which can be used with this unit SD Memory Card (8 MB to 2 GB) SDHC Memory Card (4 GB to 32 GB) SDXC Memory Card (48 GB to 64 GB) Remarks • SDHC Memory Card can be used with SDHC Memory Card or SDXC Memory Card compatible equipment. • SDXC Memory Card can only be used with SDXC Memory Card compatible equipment. • Check that the PC and other equipment are compatible when using the SDXC Memory Cards. http://panasonic.net/avc/sdcard/information/SDXC.html • Only cards bearing the SDHC logo (indicating that the card conforms to SD video standards) may be used as 4 GB to 32 GB cards. • Only cards bearing the SDXC logo (indicating that the card conforms to SD video standards) may be used as 48 GB to 64 GB cards. • Use a card with SD Speed Class¢ with "Class 6" or higher when recording motion pictures. ¢ SD Speed Class is the speed standard regarding continuous writing. • Please confirm the latest information on the following website. http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.) Note • Do not turn off the power or remove the battery, card, or the DC cable (DMW-DCC3; optional) (when the AC adaptor is in use), while the access indicator is lit, while writing, reading, or deleting the picture, formatting (P35), etc. Also, do not apply vibration, shock, or static electricity to the unit. The card or the data on the card may be damaged, and this unit may no longer operate normally. If operation fails due to vibration, impact or static electricity, perform the operation again. • Write-Protect switch A provided (When this switch is set to the [LOCK] position, no further data writing, deletion or formatting is possible. The ability to write, delete A and format data is restored when the switch is returned to its original position.) • The data on the card may be damaged or lost due to electromagnetic waves, static electricity or breakdown of the camera or the card. We recommend storing important data on a PC etc. 2 • Do not format the card on your PC or other equipment. Format it on the camera only to ensure proper operation. (P35) • Keep the Memory Card out of reach of children to prevent swallowing. VQT2S62 25