Panasonic DX 1000 User Guide - Page 107

Receiving Documents via Telephone Line 04010000001 Substitute Memory Reception 04004010009 If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically starts receiving documents into its image data memory. Stored documents are printed automatically after replacing the recording paper or the toner cartridge. 04004040009 1 When the machine finishes the memory reception and there is no recording paper or toner, an Information Code appears on the display. NO RECORDING PAPER INFO. CODE=010 4 04004060024 2 Install the recording paper (see page 30) or replace the toner cartridge (see page 28). OUT OF TONER INFO. CODE=041 The machine will automatically start printing the document stored in the memory. * PRINTING * MEMORY RCV'D DOC 04004060025 04004070010 04010070001 Note: 1. If the memory overflows, the machine will stop receiving and release the communication line. The document(s) stored in the memory up to that moment will be printed out. 2. If a power failure occurs, the document information stored in memory will be saved for up to 1 hour, when the battery is fully charged. 3. If you wish to turn off the substitute reception function, change the setting of Fax Parameter No. 22 to "Invalid" (see page 61). 04004070012 Print Collation Mode 04004020012 04004050004 The printing mechanism of the DX-1000 is a Reverse Order Stacking construction. The DX-1000 has a Print Collation Mode that stacks received documents in the correct order. When the Print Collation Mode is enabled, all received documents are stored into memory first, then printed out in Correct Order Stacking. The requirements for the Print Collation Mode to be active are; 1) Fax Parameter No. 65 PRINT COLLATION set to "Valid", and 2) enough remaining memory. The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements is not met. Sending Document Order Stacking Document Order Correct Order Stacking (Collation Mode) Reverse Order Stacking (Non-Collation Mode) 1 2 3 1 2 3 3 2 1 103