Panasonic DX 1000 User Guide - Page 17

Pre Installation Information 01007000002 Setup as SMTP mail server 1 To install the DX-1000 as SMTP mail server, the following network parameters need to be programmed on your network and on the DX-1000. • IP Address of the DNS Server (if not available, see Note) • IP Address of the DX-1000 • Subnet Mask of the DX-1000 • Name or IP Address of the Default SMTP mail server • IP Address of the Default Router • Email Address of the DX-1000 (see Note) • Host Name Note: 1. To function as SMTP mail server, the DX-1000's email address must include its unique Host name within your company domain. This unique Host name must be registered within your network's DNS (Domain Name System) server. Example: [email protected] 2. By default the machine requires the IP Address of the DNS Server and prompts you to enter the SMTP Server Name. If the DNS Server is not available, change the Fax Parameter No. 94 (DNS SERVER) to "1:Invalid". Then the machine will prompt you to enter the IP Address of the SMTP Server. Email Transmission (from the DX-1000 to a PC) 01007990002 [email protected] Panasonic Panafax UF-770 LTR SMTP01.panasonic.com (SMTP Mail Server) (Router) [email protected] SMTP POP3 01007990003 Email reception (from a PC to the DX-1000) [email protected] Panasonic Panafax UF-770 LTR (Router) POP02.panasonic.com (POP Server) SMTP01.panasonic.com (SMTP Mail Server) SMTP [email protected] 13