Panasonic DX 1000 User Guide - Page 71
Basic Transmission Settings
View all Panasonic DX 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Basic Transmission Settings 04002000001 You can temporarily change the transmission settings either before or after you place the document on the ADF. These settings are as follows; • Contrast • Resolution • Halftone • Stamp After your document has been sent, your machine will automatically return to the preset settings. 4 04002030004 Contrast 04002020006 Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker. Press CONTRAST to: 04002050006 DARKER LIGHTER CONTRAST CONTRAST = Normal DARKER LIGHTER CONTRAST CONTRAST =Lighter DARKER LIGHTER CONTRAST CONTRAST = Darker Note: To change the preset Contrast position, change the setting of Fax Parameter No. 01, see page 60. 04002070001 Resolution 04002020002 Your machine is preset to Fine resolution, this setting is suitable for most business documents. If required, this setting can be changed to Normal or 400 dpi. However, care should be exercised when using the 400 dpi setting as some Internet Fax models may not support the 400 dpi resolution, such as UF-770i. Press RESOLUTION to: 04002050009 400 dpi FINE RESOLUTION RESOLUTION = Standard 400 dpi FINE RESOLUTION RESOLUTION = Fine 400 dpi FINE RESOLUTION RESOLUTION = 400 dpi 04002070002 Note: To change the preset Resolution position, change the setting of Fax Parameter No. 02, see page 60. 67