Panasonic DX 1000 User Guide - Page 165

08001000001 If You Have Any of These Problems Troubleshooting 08001020001 Mode Symptom Action Page 08001080001 During Installation #@multitude 08001080002 The display is blinking Battery is completely discharged. This may happen at first 36 installation. After setting the clock, the blinking will stop. Document doesn't feed/multiple feed 1. Check that your document is free of staples and paper clips, and that it is not greasy or torn. 2. Check that your document is the right type to send through 65 a fax machine by consulting the list on "Documents You Cannot Send". If your document has the characteristics listed, make a photocopy of your document and send the copy instead. During Transmission 3. Check that the document is loaded properly. 66 4. Adjust the ADF Pressure. 171 Document jam The information code 031 will appear on the display if the 168 document becomes jammed. 8 Does not stamp 1. Check if Stamp LED is lit. 68 2. Check Fax parameter No. 04 and No. 28 settings. 60,61 Stamp too light Replace stamp or refill ink. 172 08001080003 Transmission Copy Quality 08001080004 Vertical lines on the Check own copy quality. If copy is OK, your machine has no 169 transmitted document problem, report to the receiving party that they have a problem. If copy is NG, clean the Document Scanning Area. Transmitted document 1. Make sure the document is set face down. 169 is blank 2. Check own copy quality. If copy is OK, your machine has no problem, report to the receiving party that they have a problem. If copy is NG, clean the Document Scanning Area. No recording paper The information code 010 will appear on the display if the paper 30 runs out. Recording paper jam The information code 001, 002 or 003 will appear on the display 167 if the paper gets jammed. Recording paper Make sure that there is paper in the Paper Cassette. Follow 30 doesn't advance into the instructions for loading paper. machine During Reception Recording paper doesn't eject after printing Check to see if the recording paper is jammed inside of the 167 machine. Recording papers are 1. Check if Fax Parameter No. 65 is set to valid. 62 not stacked in sequence. Machine 2. If memory becomes full during reception, the machine will start to print from the 1st page received. does not print from the last page received. Document auto Check Print Reduction settings. 101 reduction doesn't work 08001080091 Out of toner The information code 041 will appear on the display if the Toner 28 Cartridge runs out of toner. 161