Panasonic HC-V380 Advanced Operating Manual - Page 183

Scanning a QR code to set up a connection 1≥ Set [Direct Connection Password] to [ON]. (l 171) (When using the Wi-Fi menu screen) Press Wi-Fi button on this unit and touch 1/2 [TWIN CAMERA].  A [TWIN CAMERA] B [EXIT] (When using the recording screen) Touch the recording screen on this unit and touch . 2 Touch [Smartphone] on the screen of this  unit.    A [Wireless Twin Camera] 3 Touch [QR code] on the screen of this B [Smartphone] C [Other Camera] unit. D [CANCEL] 4 Start up the smartphone application "Image App". 5 On the smartphone, select [QR code] to scan the QR code displayed on the screen of this unit. ≥ When using an iOS device, perform the following operations: 1 Select the option that allows you to install the app on the profile screen of the "Image App", and follow the on-screen instructions to complete the installation. 2 Press the home button to close the displayed screen. 3 Touch [NEXT] on the screen of this unit to display its SSID. 4 After selecting the network name (SSID) of this unit from the Wi-Fi setup of the smartphone, start up "Image App". ≥ When the connection to this unit is complete, the image being captured by the smartphone will be displayed on the Sub Window of this unit. ≥ If the QR code cannot be scanned, refer to "Selecting this unit's SSID on the smartphone to set up a connection". (l 181) - 183 -