Panasonic HC-V380 Advanced Operating Manual - Page 23

Basic Recording motion pictures 1 Open the LCD monitor, and set this unit to Motion Picture Recording Mode. (l 18) 2 Press the recording start/stop  button to start recording.  T W A When you begin recording, ; changes to ¥. B Recording button icon 3 Press the recording start/stop button again to pause recording. ≥ Recording can also be started/stopped by touching the recording button icon. ∫ Screen indications in the Motion Picture Recording Mode R 1h20m 0h00m00s Recording mode Approximate remaining recordable time ≥ When the remaining time is less than 1 minute, R 0h00m flashes red. Recording time elapsed ≥ "h" is an abbreviation for hour, "m" for minute and "s" for second. ≥ Each time the unit is put into recording pause, the counter display will be reset to 0h00m00s. 0h00m00s R 1h20m ≥ Screen display will disappear when no touch operation is performed for a specific period of time. To display it again, touch the screen. (l 31) ≥ It will be constantly displayed when the remaining recordable time becomes less than 30 minutes. ≥ If the recording/playback button is pressed during motion picture recording, the recording will stop and this unit will be switched to Playback Mode. ≥ To change the recording format, change the [REC FORMAT] or [REC MODE]. (l 76, 77) ≥ Still pictures can be recorded while recording the motion picture. (l 26) ≥ The images recorded between pressing the recording start/stop button to start recording and pressing it again to pause recording become one scene. - 23 -