Panasonic HC-V380 Advanced Operating Manual - Page 187

Scanning a QR code to set up a connection ≥ Set [Direct Connection Password] to [ON]. (l 171) 1 Press Wi-Fi button on this unit and touch [Multi Camera]. 1/2  A [Multi Camera] 2 Touch [Unregistered] to register the B [EXIT] smartphone to be connected. ≥ Touching [Unregistered] will start a Wi-Fi connection.   C [Unregistered] D [Reset] E [ENTER] 3 Touch [QR code] on the screen of this unit. 4 Start up the smartphone application "Image App". 5 On the smartphone, select [QR code] to scan the QR code displayed on the screen of this unit. ≥ When using an iOS device, refer to page 183 in Step 5. ≥ When the connection to this unit is complete, the device name of the smartphone will be displayed on the registration screen in Step 2. ≥ If the QR code cannot be scanned, refer to "Selecting this unit's SSID on the smartphone to set up a connection". (l 184) ≥ Repeat Steps 2-5 to register and use two or more smartphones. ≥ W580 When using the Sub Camera of this unit, you can use the Wireless Multi-Camera function with only one registered smartphone. Rotate the Sub Camera to enable it. (l 45) 6 Touch [ENTER] to complete the registration. ≥ W580 The images being captured by two or more smartphones connected to this unit or by one smartphone connected to this unit and the Sub Camera of this unit* will be displayed in the Sub Windows of this unit. * Displayed if you have connected one smartphone to this unit and enabled the Sub Camera of this unit. - 187 -