Panasonic KX-FLM661 User Manual - Page 10
Installation, 1.5 Toner cartridge and drum unit
View all Panasonic KX-FLM661 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
1. Introduction and Installation 1.4.2 Rear view A B CD E F * The pictured model is KX-FLM671. A Power inlet B USB interface connector C LAN interface connector (KX-FLM671 only) D External telephone jack E Telephone line jack F Speaker Removing the shipping tape Remove the shipping tape (1) before installation. Installation 1.5 Toner cartridge and drum unit The supplied toner cartridge is a starter toner cartridge. Caution: L Read the following instructions before you begin installation. After you have read them, open the drum unit protective bag. The drum unit contains a photosensitive drum. Exposing it to light may damage the drum. Once you have opened the protective bag: - Do not expose the drum unit to light for more than 5 minutes. - Do not touch or scratch the green drum surface. - Do not place the drum unit near dust or dirt, or in a high humidity area. - Do not expose the drum unit to direct sunlight. L We cannot be responsible for any damage to the unit or degradation of print quality which may occur from the use of a non-Panasonic toner cartridge and drum unit. L Do not leave the toner cartridge out of the protective bag for a long time. It will decrease the toner life. L Do not add toner to the toner cartridge. 1 Before opening the protective bag of the new toner cartridge, shake it vertically more than 5 times. 1 Note: L Shipping tape positions are subject to change without notice. 2 Remove the toner cartridge and drum unit from the protective bags. Peel off the seal (1) from the toner cartridge. 1 L Do not touch or scratch the green drum surface. 10 For assistance, please visit http://www.panasonic.com/help