Panasonic KX-FLM661 User Manual - Page 28
Printing on special media, Printer
View all Panasonic KX-FLM661 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
3. Printer 3.1.1 Printing on special media You can print not only on plain paper but also on special media (transparencies / labels / envelopes). L Please refer to page 81 for information on recording paper. To print on transparencies Use transparencies designed for laser printing. We recommend the following: 3M® CG3300/CG5000 L Load transparency sheets one page at a time for printing, print-side down. L Remove each transparency after printing and place it on a flat surface to cool and to prevent it from curling. L Do not re-use transparencies that have already been fed through the unit. This includes transparencies that have been fed through and ejected without being printed on. L Some types of transparencies have instructions recommending which side to print on. If the print quality is poor, try printing on the other side of a new transparency. To print on labels Use labels designed for laser printing. We recommend the following: Avery® 5160/5161/5162/5163/5164/5165/5167/5168 XEROX® LWH100/LWH110/LWH120/LWH130/LWH140 L Load label sheets one page at a time for printing, print-side down. L Remove each label after printing. L Do not use the following types of labels: - Labels that are wrinkled, damaged or separated from the backing sheet. - Any sheet of labels that has spaces in it where some of the labels have been removed. - Labels that do not completely cover the backing sheet as follows. To print on envelopes Use envelopes designed for laser printing. We recommend the following: - High quality envelopes of 90 g/m2 (24 lb) paper, - Envelopes that have thin, sharply creased leading edges, - Envelopes that have diagonal seams, and 28 - Envelopes with a moisture content of 4 % to 6 % by weight. L You can load 10 envelope of 90 g/m2 (24 lb) paper at a time for printing, print-side down. L Insert envelopes, print-side down (1), then adjust the recording paper guides (2). 1 2 L Remove each envelope after printing. Note: L Wrinkles and waving may occur in some cases, even if high quality envelopes are used. L Avoid printing in high humidity. High humidity may cause the envelope to curl or seal the envelope. L Store envelopes away from moisture and humidity, where they can lay flat and their edges will not be bent or damaged. Do not use envelopes with any of the following characteristics (using these may result in paper jams): L Irregularly shaped envelopes L Envelopes with curls, wrinkles, nicks, twists, dog- ears or other damage L Envelopes with side seam construction L Highly textured envelopes, or envelopes with extremely shiny surfaces L Envelopes that seal by removing a peel-off strip L Envelopes with more than one flap to be sealed L Self-adhesive envelopes L Envelopes that are baggy or not sharply creased L Embossed envelopes L Envelopes that have previously been printed on L Envelopes that include cotton and/or fiber material