Panasonic KX-FLM661 User Manual - Page 23
Installing Multi-Function Station
View all Panasonic KX-FLM661 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2. Preparation 2. {Set} i Enter the subnet mask of the network. i {Set} For the default gateway: 1. Press {5}{0}{3} to display "DEFAULT GATEWAY". 2. {Set} i Enter the default gateway of the network. i {Set} 5 Press {Menu} to exit. 6 Install Multi-Function Station on the computer that you want to use it with. See page 23 for details. To correct a mistake in the IP address, subnet mask, or default gateway Press {} to move the cursor to the incorrect number, and make the correction. 2.10.3 Setting the computer for PC fax reception You need to select the computer that will be used for receiving faxes. L Make sure PC fax setting is set to "ALWAYS" or "CONNECTED" beforehand (feature #442 on page 55). 1 {Menu} i {#}{4}{4}{3} i {Set} 2 Press {V} or {^} repeatedly to select the desired computer. i {Set} 3 Press {Menu} to exit. Note: L If the unit is not connected to the LAN, the computer connected to the unit by USB is assigned as the default computer for PC fax reception. L To select the desired computer easily, change the PC name beforehand (page 26). 2.11 Installing Multi-Function Station 2.11.1 Required computer environment Panasonic Multi-Function Station software enables the unit to carry out the following functions: - Printing on plain paper, transparencies, labels and envelopes - Scanning documents and converting an image into text with Readiris OCR software - Scanning from other applications for Microsoft® Windows® that support TWAIN scanning - Storing, editing or erasing items in directories using your computer - Programming the features using your computer - Sending, receiving fax documents using your computer To use Multi-Function Station on your computer, the following are required: Operating System: Windows 98/Windows Me/Windows 2000/Windows XP/Windows Vista®/Windows 7 CPU: Windows 98: Pentium® 90 MHz or higher processor Windows Me: Pentium 150 MHz or higher processor Windows 2000: Pentium 166 MHz or higher processor Windows XP: Pentium 300 MHz or higher processor Windows Vista/Windows 7: Pentium 4 or higher processor RAM: Windows 98: 24 MB (32 MB or more recommended) Windows Me: 32 MB (64 MB or more recommended) Windows 2000: 64 MB or more Windows XP: 128 MB or more Windows Vista: 512 MB or more Windows 7: 1 GB (2 GB or more recommended) Other Hardware: CD-ROM drive Hard disk drive with at least 150 MB of available space USB interface LAN interface (10Base-T/100Base-TX) (KX-FLM671 only) Other: Internet Explorer® 5.0 or later Warning: L To assure continued emission limit compliance: - use only shielded USB cable (Example: Hi-Speed USB 2.0 certified cable). - use only shielded LAN cable (Category 5 (Cat-5) Ethernet cable) (KX-FLM671 only). L To protect the unit, use only shielded USB cable in areas where thunderstorms occur. Note: L A USB cable is not supplied. Please purchase a shielded Type-A male/Type-B male USB cable. For assistance, please visit http://www.panasonic.com/help 23