Panasonic KX-FLM661 User Manual - Page 63
Help, Reports and Displays, 12.1 Report messages, NO DOCUMENT / FAILED PICKUP
View all Panasonic KX-FLM661 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
12. Help 1R2epHoerltps and Displays 12.1 Report messages To indicate the unit's fax transmission/reception status, one of the following messages will be printed on the sending and journal reports (page 38). Message COMMUNICATION ERROR DOCUMENT JAMMED ERROR-NOT YOUR UNIT JUNK FAX PROH. REJECT MEMORY FULL NO DOCUMENT / FAILED PICKUP OTHER FAX NOT RESPONDING PRESSED THE 'Stop' KEY THE COVER WAS OPENED OK Code 40-42 46-72 FF 43 44 ----53 54 59 70 --------- --------- Cause & Solution L A transmission or reception error occurred. Try again or check with the other party. L A line problem occurred. Connect the telephone line cord to a different jack and try again. L An overseas transmission error occurred. Try using the overseas mode (feature #411 on page 53). L Remove the jammed document (page 77). L A transmission or reception error occurred because of a problem with the other party's fax machine. Check with the other party. L The junk fax prohibitor feature of this unit rejected fax reception. L The memory is full of received documents due to a lack of recording paper or a recording paper jam. Install paper (page 15) or remove the jammed paper (page 74). L If feature #442 is set to "ALWAYS" (page 55), check the connection between the computer and the unit. L The document was not fed into the unit properly. Reinsert it and try again. L The other party's fax machine is busy or has run out of recording paper. Try again. L The other party's fax machine rings too many times. Send the fax manually (page 38). L The other party's machine is not a fax machine. Check with the other party. L The number you dialed is not in service. L {Stop} was pressed and fax communication was canceled. L The front cover was opened. Close it and try again. L Fax transmission or reception was successful. For assistance, please visit http://www.panasonic.com/help 63