Home » Panasonic Manuals » Telephony » Panasonic KXTDE100 » Manual Viewer

Panasonic KXTDE100 KXTDE100 User Guide - Page 21

Display, Using a Navigator Key/Jog Dial/Volume Key, Examples, Restrictions

Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

1.1.1 Before Operating the Telephones If you use a single line telephone which does not have the " " or "#" keys; it is not possible to access features that have " " or "#" in their feature numbers. Tone You will hear various tones, during or after an operation, for confirmation. Refer to "4.3.1 Tone" (Appendix). Display In this manual, you will see "the display ...". This refers to the display of a Panasonic proprietary telephone. If your telephone is not a Panasonic display proprietary telephone, the message will not be displayed. If you use a Panasonic display proprietary telephone, the display helps you confirm the settings. Some proprietary telephones also give you easy access to features. A message is displayed depending on the feature. By pressing the corresponding button on the side or at the bottom of the display, or pressing the Navigator Key, you can access the desired feature. Furthermore, depending on the display proprietary telephone, you can operate features or make calls using the display message. Refer to "1.4 Display Features". Your Extension Number If you use a Panasonic display proprietary telephone, you can check your own extension number on the display. Press the TRANSFER button or Soft (S1) button while on-hook. Using a Navigator Key/Jog Dial/Volume Key The Navigator Key can be used for the display contrast and the volume control or you can search for desired items on the display. Press the Navigator Key/Volume Key or rotate the Jog Dial in the desired direction. The contrast or the volume level and the items will change as follows: Navigator Key Jog Dial Volume Key Up (Level increases) Left (counter-clockwise) Right (clockwise) Up (Level increases) Left ENTER Right Down (Level decreases) Level decreases Level increases Down (Level decreases) Examples The displays and the illustrations shown as examples are from a telephone connected to the KX-TDE200. Restrictions Some features may be restricted at your extension depending on system programming and the type of telephone being used. Document Version 2008-10 Operating Manual 21

Section	Page
Table of Contents	15
1 Operation	19
1.1 Before Operating the Telephones	20
1.1.1 Before Operating the Telephones	20
1.2 Basic Operations	30
1.2.1 Making Calls	30
1.2.2 Answering Calls	32
1.3 Telephone Features and Operation	34
1.3.1 Absent Message	34
1.3.2 Account Code Entry	35
1.3.3 Alternate Calling—Ring/Voice	36
1.3.4 Automatic Callback Busy (Camp-on)	36
1.3.5 BGM (Background Music)	38
1.3.6 Call Hold	38
1.3.7 Call Monitor	41
1.3.8 Call Park	41
1.3.9 Call Pickup	43
1.3.10 Call Splitting	44
1.3.11 Call Transfer	45
1.3.12 CALL WAITING FEATURES	48
1.3.13 Call Waiting Tone	53
1.3.14 Character Entry	54
1.3.15 Conference	57
1.3.16 Conference, Unattended	61
1.3.17 Data Line Security	62
1.3.18 DISA (Direct Inward System Access)	63
1.3.19 DND (Do Not Disturb)	66
1.3.20 Door Open	69
1.3.21 Doorphone Call	70
1.3.22 EFA (External Feature Access)	71
1.3.23 Executive Busy Override	71
1.3.24 Extension Dial Lock	73
1.3.25 Extension Feature Clear	74
1.3.26 Extension PIN (Personal Identification Number)	75
1.3.27 External Relay	76
1.3.28 External Sensor	77
1.3.29 FWD (Call Forwarding)	77
1.3.30 Hands-free Answerback	84
1.3.31 Hands-free Operation	85
1.3.32 Headset Operation	85
1.3.33 HOSPITALITY FEATURES	89
1.3.34 Hot Line	89
1.3.35 ICD GROUP FEATURES	90
1.3.36 ICD Group Features—Call Log History for ICD Group	91
1.3.37 ICD Group Features—Incoming Call Queue Monitor	92
1.3.38 ICD Group Features—Log-in/Log-out	93
1.3.39 ICD Group Features—Log-in/Log-out Monitor and Remote Control	95
1.3.40 ICD Group Features—Manual Queue Redirection	97
1.3.41 ICD Group Features—Supervisory	97
1.3.42 Message Waiting	99
1.3.43 Mute	101
1.3.44 Off-hook Monitor	101
1.3.45 OHCA (Off-hook Call Announcement)	102
1.3.46 One-touch Dialing	102
1.3.47 Paging	103
1.3.48 Paralleled Telephone	104
1.3.49 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension	105
1.3.50 Printing Message	108
1.3.51 Privacy Release	109
1.3.52 Private Network Features—CLIP (Calling Line Identification Presentation)	110
1.3.53 Private Network Features—CLIR (Calling Line Identification Restriction)	111
1.3.54 Private Network Features—COLP (Connected Line Identification Presentation)	111
1.3.55 Private Network Features—COLR (Connected Line Identification Restriction)	112
1.3.56 Private Network Features—Displaying Your Telephone Number on the Called Party’s Telephone	112
1.3.57 Private Network Features—TIE Line Access	113
1.3.58 Quick Dialing	114
1.3.59 Redial, Last Number	114
1.3.60 Room Status Control	115
1.3.61 Self Labeling (KX-NT366 only)	118
1.3.62 Speed Dialing, Personal	119
1.3.63 Speed Dialing, System	120
1.3.64 SVM (Simplified Voice Message)	120
1.3.65 TAFAS (Trunk Answer From Any Station)	130
1.3.66 Timed Reminder	130
1.3.67 Time Service	132
1.3.68 Verification Code Entry	133
1.3.69 VOICE MAIL FEATURES	133
1.3.70 Voice Mail Features—LCS (Live Call Screening)	134
1.3.71 Voice Mail Features—Two-way Record	136
1.3.72 Voice Mail Features—Voice Mail Integration	137
1.3.73 Wake-up Call	138
1.3.74 Walking COS	140
1.3.75 Walking Extension	141
1.3.76 Walking Extension, Enhanced	142
1.3.77 Whisper OHCA	144
1.3.78 Wireless XDP Parallel Mode	145
1.4 Display Features	146
1.4.1 Call Log, Incoming	146
1.4.2 Call Log, Outgoing	148
1.4.3 Directories	151
1.4.4 System Feature Access	152
2 Manager Operation	157
2.1 Manager Service Features	158
2.1.1 Dial Tone Transfer	158
2.1.2 External BGM (Background Music)	158
2.1.3 OGM (Outgoing Messages)	158
2.1.4 Private Network Features—NDSS (Network Direct Station Selection) Monitor Release	160
2.1.5 Remote Extension Dial Lock	161
2.1.6 Time Service Mode Control	161
3 Customizing Your Phone & System	163
3.1 Personal Programming	164
3.1.1 Programming Information	164
3.1.2 Personal Programming	164
3.1.3 Programming Feature Clear	172
3.1.4 Customizing the Buttons	174
3.2 Manager Programming	179
3.2.1 Programming Information	179
3.2.2 Manager Programming	179
3.3 System Programming	182
3.3.1 Programming Information	182
3.3.2 System Programming	185
4 Appendix	189
4.1 Troubleshooting	190
4.1.1 Troubleshooting	190
4.2 Feature Number Table	193
4.2.1 Feature Number Table	193
4.3 Tone	201
4.3.1 Tone	201
Index	205
Symbols	206
A	206
B	206
C	206
D	206
E	207
F	207
G	207
H	207
I	207
J	207
K	207
L	207
M	207
N	208
O	208
P	208
Q	208
R	208
S	208
T	209
U	209
V	209
W	209

Match case Limit results 1 per page

If you use a single line telephone which does not have the "

" or "#" keys;

it is not possible to access features that have "

" or "#" in their feature numbers.

Tone

You will hear various tones, during or after an operation, for confirmation. Refer to "4.3.1

Tone" (Appendix).

Display

In this manual, you will see "the display …". This refers to the display of a Panasonic proprietary telephone. If

your telephone is not a Panasonic display proprietary telephone, the message will not be displayed.

If you use a Panasonic display proprietary telephone, the display helps you confirm the settings. Some

proprietary telephones also give you easy access to features. A message is displayed depending on the

feature. By pressing the corresponding button on the side or at the bottom of the display, or pressing the

Navigator Key, you can access the desired feature.

Furthermore, depending on the display proprietary telephone, you can operate features or make calls using

the display message. Refer to "1.4

Display Features".

Your Extension Number

If you use a Panasonic display proprietary telephone, you can check your own extension number on the display.

Press the TRANSFER button or Soft (S1) button while on-hook.

Using a Navigator Key/Jog Dial/Volume Key

The Navigator Key can be used for the display contrast and the volume control or you can search for desired

items on the display. Press the Navigator Key/Volume Key or rotate the Jog Dial in the desired direction.

The contrast or the volume level and the items will change as follows:

Navigator Key

Jog Dial

Volume Key

(Level

increases

)

Down

(Level

decreases

)

Right

Left

ENTER

Left

(counter-clockwise)

Level

decreases

Right

(clockwise)

Level

increases

(Level

increases

)

Down

(Level

decreases

)

Examples

The displays and the illustrations shown as examples are from a telephone connected to the KX-TDE200.

Restrictions

Some features may be restricted at your extension depending on system programming and the type of

telephone being used.

Document Version

2008-10

Operating Manual

1.1.1 Before Operating the Telephones