Panasonic KXTDE100 KXTDE100 User Guide - Page 95

1.3.39 ICD Group Features-Log-in/Log-out Monitor and Remote Control • * The status will be as follows: Ready ® Not Ready Not Ready ® Ready Wrap-up ® Not Ready • The Log-in/Log-out of a specified group button light shows the current status as follows: Off: Log-in mode Red on: Log-out mode • The Wrap-up button alternates the setting of Wrap-up mode, Not Ready mode or Ready mode. The Wrap-up button light shows the current status as follows: Off: Ready mode Red on: Not Ready mode Flashing red: Wrap-up mode • In Wrap-up mode/Not Ready mode, your extension does not receive calls through any group, even if it belongs to multiple groups. • The last remaining logged-in extension may not be allowed to log out, depending on system programming. • The Supervisor extension can control the Log-in/Log-out status of other extensions. For more information, refer to "1.3.39 ICD Group Features-Log-in/Log-out Monitor and Remote Control". • For information about other ICD group features, refer to "1.3.35 ICD GROUP FEATURES". Customizing Your Phone • 3.1.4 Customizing the Buttons Create or edit a Log-in/Log-out button, a Log-in/Log-out of a specified group button or a Wrap-up button. 1.3.39 ICD Group Features-Log-in/Log-out Monitor and Remote Control An extension assigned as a supervisor (supervisor extension) can monitor the Log-in/Log-out status of incoming call distribution (ICD) group members with the lights of corresponding DSS buttons. The supervisor extension can change the Log-in/Log-out status of an extension by pressing the corresponding DSS button. To perform this operation, the supervisor has to enter incoming call queue monitoring mode first. Document Version 2008-10 Operating Manual 95