Panasonic PTDS8500U PTDS8500U User Guide - Page 100
Error information When [FAILED] has appeared for an item
UPC - 885170010994
View all Panasonic PTDS8500U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
NETWORK menu JJError information page When "Error (Detail)" is displayed on the status information screen, click it to display the error details. zzDepending on the nature of the error, the projector may be placed in the standby mode for its own protection. Settings OK: Normal operation FAILED: Occurrence of trouble QQWhen [FAILED] has appeared for an item Parameter MAIN CPU BUS FAN INPUT AIR TEMPERATURE OPTICS MODULE TEMPERATURE AROUND LAMP TEMPERATURE LAMP1 REMAIN TIME LAMP2 REMAIN TIME LAMP1 STATUS LAMP2 STATUS APERTURE (CONTRAST-SHUTTER) INPUT AIR TEMP. SENSOR OPTICS MODULE TEMP. SENSOR AROUND LAMP TEMP. SENSOR BATTERY AIRFLOW SENSOR COVER OPEN ACF UNIT FILTER REMAIN BRIGHTNESS SENSOR AC POWER Description Trouble has occurred in the microcomputer circuitry. Consult your dealer. Trouble has occurred in the fan or its drive circuit. Consult your dealer. The input air temperature is too high. It may be that the projector is being used in an operating environment where the temperature is high such as near a heating appliance. The temperature inside the projector is high. It may be that the projector is being used in an operating environment where the temperature is high such as near a heating appliance. The temperature around the lamp is too high. It may be that the projector's ventilation holes are blocked. The lamp runtime has exceeded the prescribed cumulative time, and it is now time to replace the lamp. The lamp has failed to light. Wait a short while for the lamp to cool off, and then turn on the power. Trouble has occurred in the contrast shutter circuitry. Consult your dealer. Trouble has occurred in the sensor used to detect the input air temperature. Consult your dealer. Trouble has occurred in the temperature detection sensor inside the projector. Consult your dealer. Trouble has occurred in the sensor used to detect the exhaust air temperature. Consult your dealer. The backup battery has been run out. Consult your dealer. Trouble has occurred in the sensor used to detect the airflow volume. Consult your dealer. The lamp unit cover is not attached securely. Check the lamp unit compartment. The air cleaning filter (ACF) is not installed or trouble has occurred. (Æ 109 page) The filter remaining is getting less. (Æ 108 page) Trouble has occurred in the brightness sensor. If the problem cannot be corrected by turning the power off and on, consult your dealer. AC power supply voltage input has dropped. Check that there is sufficient electrical wiring capacity for the projector's power consumption requirements. Note zzThe ACCESS ERROR INFORMATLION/ACCESS INFORMATION displays the past several thousand accesses/requests. If many accesses/requests are made at a time, some of them may not be found in the information. zzCheck the ACCESS ERROR INFORMATION/ACCESS INFORMATION regularly. 100 - ENGLISH