Panasonic PTDS8500U PTDS8500U User Guide - Page 101
E-mail setup
UPC - 885170010994
View all Panasonic PTDS8500U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
NETWORK menu JJE-mail setup page With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be sent to one or more preset e-mail addresses (maximum two addresses). Click [Detailed set up], then [E-mail set up] to display the E-mail setup page. Select "Enable" to use the E-mail function. Enter the IP address or server name of the E-mail server (SMTP). The DNS server must be set if the server name is entered. Enter the E-mail address of the projector. (maximum 63 characters) The user can enter the location of, for example, the installed projector so that the recipient may easily identify the originator of the E-mail. (maximum 63 characters) The user can modify the minimum time interval of temperature warning mail. The default value is 60 minutes. In this case, the user cannot send another mail for 60 minutes after sending previous temperature warning mail even the set warning temperature is reached again. Enter the E-mail address of your desired recipient. Settings Select the conditions for sending E-mail. MAIL CONTENTS: Select [NORMAL] or [SIMPLE]. ERROR: an error is detected by self-diagnosis. LAMP1 RUNTIME: remaining lamp service time has reached the value set in the field. LAMP2 RUNTIME: remaining lamp service time has reached the value set in the field. FILTER REMAIN: remaining filter service time has reached the value set in the field. INPUT AIR TEMPERATURE: intake air temperature has reached the value set in the field. ENGLISH - 101