Pentax K-7 K-7 Manual - Page 105
Use a commercially available ND Neutral Density filter if the subject
![]() |
UPC - 027075155145
View all Pentax K-7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
• Turn the rear e-dial (S) while pressing the m button to change the EV compensation value. (p.115) • Set the aperture value in increments of 1/3 EV or 1/2 EV. Set the exposure steps in [1. EV Steps] in the [A Custom Setting 1] menu. (p.116) • The proper exposure may not be obtained with the selected aperture when the sensitivity is set to other than [AUTO] (p.90). 103 Exposure Warning If the subject is too bright or too dark, the shutter speed will blink on the status screen and LCD panel and in the viewfinder. When the subject is too bright, set the aperture smaller (larger number), and when too dark, open the aperture further (smaller number). Once blinking stops, you 4 can take a picture with proper exposure. Use a commercially available ND (Neutral Density) filter if the subject is too bright. Use a flash if it is too dark. Shooting Functions e-dial in c Mode You can set the functions of the front and rear e-dials in c mode. Set in [25. e-dial in Av mode] in the [A Custom Setting 4] menu (p.86). Settings Front e-dial (R) 1 - (Not Available) 2 EV Compensation 3 c (Aperture) 4 Sensitivity 5 c (Aperture) Rear e-dial (S) c (Aperture) c (Aperture) EV Compensation c (Aperture) Sensitivity
![](/manual_guide/products/pentax-k7-k7-manual-4fbd91e/105.png)