Pentax K-7 K-7 Manual - Page 176
Using P-TTL Auto Mode, About the Display Panel for AF360FGZ
UPC - 027075155145
View all Pentax K-7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
174 About the Display Panel for AF360FGZ The AF360FGZ itself does not have the function to set the FORMAT size to [DIGITAL]. However, when it is used with a SLR Digital Camera, the difference in focal length between 35 mm film camera and the Q is automatically calculated based on the difference in angle of view and is displayed on the panel (when using DA, DA L, D FA, FA J, FA or F lens). The conversion indicator appears and the format size indicator disappears when the exposure metering timer of the Q is on (it returns to 35 mm format display when the exposure metering timer is turned off). Lens focal length 85mm 77mm 50mm 35mm 28mm 24mm 20mm 18 mm Exposure metering timer Off 85mm 70mm 50mm 35mm 28mm 24mm* 5 Exposure metering timer On 58mm 48mm 34mm 24mm 19mm 16mm* * Using wide-angle panel Using the Flash Using P-TTL Auto Mode You can use [P-TTL auto] with the AF540FGZ, AF360FGZ, AF200FG or AF160FC flash unit. The flash pre-flashes before the actual flash and confirms the subject (the distance, brightness, contrast, whether it is backlit, etc.) using the camera 77-segment metering sensor. The flash output for the actual flash is adjusted based on the information obtained from the pre-flash, enabling flash photography with more appropriate exposure for the subject than with normal TTL auto. 1 Remove the cover of the hot shoe and attach the external flash. 2 Turn on the camera and the external flash. 3 Set the external flash mode to [P-TTL auto]. 4 Confirm that the external flash is fully charged and then take the picture.